Search
CSV
RISOptimization of an Algorithm for the Measurement of Unsteady Flow Rates in High Pressure Pipelines and Application of a Newly Designed Flowmeter to Volumetric Pump Analysis
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: An innovative, efficient, and robust algorithm is presented for the evaluation of the instantaneous flowrate in highpressure liquid flow pipelines. This algorithm is based on the pressure time histories measured at two ...
Modal Analysis of Fuel Injection Systems and the Determination of a Transfer Function Between Rail Pressure and Injection Rate
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: A detailed analysis of a common rail (CR) fuel injection system, equipped with solenoid injectors for Euro 6 diesel engine applications, has been performed in the frequency domain. A lumped parameter numerical model of the ...
Insulating a Solid Brick Wall from Inside: Heat and Moisture Transfer Analysis of Different Options
Publisher: American Society of Civil Engineers
Abstract: In the present paper, the thermohygrometric performances of a clay brick wall, with reference to the typical northern Italy’s historical building envelopes, improved with an insulating layer on the inner side, are analyzed. ...
Hydraulic Performance Comparison Between the Newly Designed Common Feeding and Standard Common Rail Injection Systems for Diesel Engines
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: A newgeneration common feeding (CF) fuel injection system without rail has been compared with the standard common rail (CR) apparatus for diesel engine passenger cars. The highpressure pump in the CF apparatus is connected ...
New Methodology for the Identification of the Leakage Paths and Guidelines for the Design of Common Rail Injectors With Reduced Leakage
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The static leakage of a common rail (CR) injector is the flow-rate that is recirculated from the injector when the pilot-stage is not actuated. It is a critical issue in the development of modern CR injectors, because it ...