Search
Now showing items 1-10 of 15
High Amplitude Combustion Instabilities in an Annular Combustor Inducing Pressure Field Deformation and Flame Blow Off
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This article reports experiments carried out in the laboratory scale annular combustor MICCA-spray equipped with multiple swirling spray injectors. The experimental setup consists in an air plenum connected to a combustion ...
Analysis of Thermo-Acoustic Instabilities Induced by Hydrogen Swirling Flames
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: A considerable research effort has been concerned combustion dynamics of systems fed with hydrocarbon fuels. The case of pure hydrogen/air flames deserves to be specifically considered because hydrogen is highly reactive, ...
Different Flame Patterns Linked With Swirling Injector Interactions in an Annular Combustor
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Experiments in cold and reactive conditions carried out in linear arrays of injectors indicate that the flows established by neighboring injectors exhibit alternating patterns if the distance between two injectors is too ...
Large Eddy Simulation of Light-Round in an Annular Combustor With Liquid Spray Injection and Comparison With Experiments
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The light-round is defined as the process by which the flame initiated by an ignition spark propagates from burner to burner in an annular combustor, eventually leading to a stable combustion. Combining experiments and ...
Strong Azimuthal Combustion Instabilities in a Spray Annular Chamber With Intermittent Partial Blow-Off
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This article reports experiments carried out in the MICCA-spray combustor developed at EM2C laboratory. This system comprises 16 swirl spray injectors. Liquid n-heptane is injected by simplex atomizers. The combustion ...
Flame and Spray Dynamics During the Light-Round Process in an Annular System Equipped With Multiple Swirl Spray Injectors
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: A successful ignition in an annular multi-injector combustor follows a sequence of steps. The first injector is ignited; two arch-shaped flame branches nearly perpendicular to the combustor backplane form; they propagate, ...
Azimuthal Instabilities of an Annular Combustor With Different Swirling Injectors
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Experiments are carried out on the laboratoryscale MICCASpray annular combustor to examine the effects of swirlers on combustion instabilities. This system comprises 16 sprayswirl injectors and gives rise to instabilities ...
Assessing Transfer Matrix Models and Measurements Using Acoustic Energy Conservation Principles
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Acoustic transfer matrices are widely used in the analysis of combustion dynamics of gas turbines. The reliability of the analysis thus depends on the quality of the determination of the transfer matrices of the individual ...
Effect of Different Fuels on Combustion Instabilities in an Annular Combustor
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Combustion instability in annular combustors of jet engines is a recurring issue. In this study, the characteristics of instabilities for different fuels are investigated by combining the instability maps obtained in a ...
A Joint Experimental and Large Eddy Simulation Characterization of the Liquid Fuel Spray in a Swirl Injector
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The quality of liquid fuel spray injection determines to a large extent the performance of aero-engine combustors. This investigation focuses on the detailed characterization of the liquid fuel spray in a test rig targeted ...