Abstract: Due to the increasing fuel cost and environmental targets, the demand for more efficient gas turbines has risen considerably in the last decade. One of the most important systems in a gas turbine is the secondary air system, ...

Abstract: In modern aeroengines, the lubrication system plays a key role due to the demand for high reliability. Oil is used not only for the lubrication of bearings, gears, or seals but it also removes large amounts of the generated ...

Abstract: Oil system architecture in aero engines has remained almost the same for the last 35 years. At least one mechanically-driven oil feed pump is responsible for distributing pressurized oil into the bearing chambers and several ...

Abstract: Bearings for aero engine applications are subjected to a high thermal impact because of the elevated speeds and loads. The high rate of heat generation in the bearing cannot be sustained by the materials used and, in the ...

Abstract: Oil system architecture in aero engines has remained almost the same for the last 30 years. At least one oil feed pump is responsible for distributing pressurized oil into the bearing chambers, and several scavenge pumps ...

Abstract: For the past 25 years brush seal technologies have evolved into the aero engine designs and, more generally, into the gas turbine world, not only for sealing gas areas at different pressure levels but also for sealing ...

Abstract: In modern aeroengines, the lubrication system holds a key role due to the demand for high reliability standards. An aeroengine bearing chamber contains components like bearings and gears. Oil is used for lubrication and ...