Search
Now showing items 1-5 of 5
A Fully Wet and Fully Dry Tiny Circular Fin Method for Heat and Mass Transfer Characteristics for Plain Fin-and-Tube Heat Exchangers Under Dehumidifying Conditions
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This study proposes a new method, namely the “fully wet and fully dry tiny circular fin method,” for analyzing the heat and mass transfer characteristics of plain fin-and-tube heat exchangers ...
Frictional Performance of U-Type Wavy Tubes
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Measurements of the pressure drops for water flowing in small diameter tubes having U-type wavy configuration are presented. The inner diameters of the test copper tubes (D) are 3.43, 5.07, ...
Influence of Circuitry Arrangement on the Pressure Drops of Two-Row Finned Tube Evaporators
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This study experimentally investigates the effect of circuitry on the refrigerant-side pressure drops of plate finned tube evaporators. Experiments were performed with countercross, parallel-cross, ...
Effect of Variable Heating Load on the Refrigerant Distribution of a Dual Cold-Plate System
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This study examines the refrigerant distribution of a dual cold-plate system subject to the influence of heating load, using a R-134a based vapor compression system with a nominal capacity ...
Investigations of the Thermal Spreading Effects of Rectangular Conduction Plates and Vapor Chamber
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This study examines the spreading ability of rectangular plates numerically, analytically, and experimentally. The effect of aspect ratio, defined as an equivalent radius of a heater divided by ...