Search
CSV
RISStudy on the Transfer Film Layer in Sliding Contact Between Polymer Composites and Steel Disks Using Nanoindentation
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: In the present work, nanoindentation experiments were carried out to characterize the localized transfer film layer (TFL) on a steel disk, which resulted from a sliding contact of the latter against a polymer composite ...
The Impacts of Interannual Climate Variability on the Declining Trend in Terrestrial Water Storage over the Tigris–Euphrates River Basin
Publisher: American Meteorological Society
Tribological Behavior of Surface Textured Short Carbon Fiber-Reinforced Nylon Composites Fabricated by Three-Dimensional Printing Techniques
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: In this paper, short carbon fiber-reinforced nylon (SCFRN) composites were fabricated using the fused deposition modeling (FDM) technology. In particular, different surface textures, namely convex squares and triangles, ...
Test on Mechanical and Technological Properties of (LCC) 022Cr22Ni5Mo3N (2205) Stainless Steel Bars
Publisher: American Society of Civil Engineers
Abstract: This paper presents a series of tests on the tensile, bending, welding, and threaded connection of 022Cr22Ni5Mo3N (2205) stainless steel bars. These tests prove whether the stainless steel bars have excellent mechanical ...
Integrated Experimental and Numerical Study on Permanent Deformation of Asphalt Pavement at Intersections
Publisher: American Society of Civil Engineers
Abstract: It has been observed that permanent deformation (or rut) in the asphalt pavement at an intersection is much more severe than a deformation away from the intersection due to breaking horizontal forces and longer loading ...
Simulation Research of Heat Transfer Characteristics of Carbon Dioxide in Microchannel Evaporator
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: In this paper, the simulation model of two-dimensional (2D) distribution parameter of a CO2 microchannel evaporator was developed using the finite element method. The simulation model of the CO2 microchannel evaporator was ...
Stress Intensity Factor Analysis of PCC Slab after Rubblization by FEA
Publisher: American Society of Civil Engineers
Abstract: In order to comparing the stress situations of asphalt overlay on the rubblized or non rubblized slab. Based on eight-node isoparametric element, the stress intensity factor of asphalt overlay on the two different base ...
Experimental Study on Heat Transfer Performances of Flat Tube Bank Fin Heat Exchanger Using Four Different Fin Patterns
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Air-side heat transfer and flow friction characteristics of four different fin patterns suitable for flat tube bank fin heat exchangers are investigated experimentally. The fin patterns are the fin with six dimples, the ...