Search
Now showing items 1-10 of 13
High Amplitude Combustion Instabilities in an Annular Combustor Inducing Pressure Field Deformation and Flame Blow Off
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This article reports experiments carried out in the laboratory scale annular combustor MICCA-spray equipped with multiple swirling spray injectors. The experimental setup consists in an air plenum connected to a combustion ...
Large Eddy Simulation of Light-Round in an Annular Combustor With Liquid Spray Injection and Comparison With Experiments
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The light-round is defined as the process by which the flame initiated by an ignition spark propagates from burner to burner in an annular combustor, eventually leading to a stable combustion. Combining experiments and ...
Strong Azimuthal Combustion Instabilities in a Spray Annular Chamber With Intermittent Partial Blow-Off
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This article reports experiments carried out in the MICCA-spray combustor developed at EM2C laboratory. This system comprises 16 swirl spray injectors. Liquid n-heptane is injected by simplex atomizers. The combustion ...
Flame and Spray Dynamics During the Light-Round Process in an Annular System Equipped With Multiple Swirl Spray Injectors
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: A successful ignition in an annular multi-injector combustor follows a sequence of steps. The first injector is ignited; two arch-shaped flame branches nearly perpendicular to the combustor backplane form; they propagate, ...
Azimuthal Instabilities of an Annular Combustor With Different Swirling Injectors
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Experiments are carried out on the laboratoryscale MICCASpray annular combustor to examine the effects of swirlers on combustion instabilities. This system comprises 16 sprayswirl injectors and gives rise to instabilities ...
Assessing Transfer Matrix Models and Measurements Using Acoustic Energy Conservation Principles
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Acoustic transfer matrices are widely used in the analysis of combustion dynamics of gas turbines. The reliability of the analysis thus depends on the quality of the determination of the transfer matrices of the individual ...
Effect of Different Fuels on Combustion Instabilities in an Annular Combustor
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Combustion instability in annular combustors of jet engines is a recurring issue. In this study, the characteristics of instabilities for different fuels are investigated by combining the instability maps obtained in a ...
A Joint Experimental and Large Eddy Simulation Characterization of the Liquid Fuel Spray in a Swirl Injector
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The quality of liquid fuel spray injection determines to a large extent the performance of aero-engine combustors. This investigation focuses on the detailed characterization of the liquid fuel spray in a test rig targeted ...
Impact of Heat Release Distribution on the Spinning Modes of an Annular Combustor With Multiple Matrix Burners
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The present article reports a numerical analysis of instability coupled by a spinning mode in an annular combustor. This corresponds to experiments carried out on the MICCA test facility equipped with 16 matrix burners. ...
Comparison of Flame Describing Functions Measured in Single and Multiple Injector Configurations
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Recent investigations of combustion instabilities in annular systems indicate that considerable insights may be gained by using information gathered in singlesector experiments. Such experiments are, for example, employed ...