Search
CSV
RISZn0.6Fe0.1Cu0.3/GDC Composite Anode for Solid Oxide Fuel Cell
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Recent research results show that homogeneity and microstructure are very important parameters for the development of low cost materials with better performance for fuel cell applications. This ...
Modeling Cyclic Embedment of Deep-Water Pipelines Using Large Displacement Limit Analysis
Publisher: American Society of Civil Engineers
Abstract: The as-laid embedment is a key design element of deep-water pipelines, as it significantly affects the longitudinal and transverse pipe–soil interaction and thermal insulation. Due to the small-amplitude oscillations driven ...
Modeling Cyclic Embedment of Deep-Water Pipelines Using Large Displacement Limit Analysis
Publisher: American Society of Civil Engineers
Abstract: The as-laid embedment is a key design element of deep-water pipelines, as it significantly affects the longitudinal and transverse pipe–soil interaction and thermal insulation. Due to the small-amplitude oscillations driven ...
Preparation and Characterization of Nanocomposite Calcium Doped Ceria Electrolyte With Alkali Carbonates (NK-CDC) for SOFC
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The entire world’s challenge is to find out the renewable energy sources due to rapid depletion of fossil fuels because of their high consumption. Solid oxide fuel cells (SOFCs) are believed ...
Characterization and Development of Bio-Ethanol Solid Oxide Fuel Cell
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Bio-ethanol based fuel cell is an energy source with a promising future. The low temperature solid oxide fuel cell fed by direct bio-ethanol is receiving considerable attention as a clean and ...
Updating Multiscale Model of a Long-Span Cable-Stayed Bridge
Publisher: American Society of Civil Engineers
Abstract: To accurately calculate stress responses and evaluate fatigue damage of the critical structural members/joints of a long-span cable-stayed bridge, a multiscale finite-element (FE) model of the bridge has been developed by ...
Centrifuge Modeling for Seismic Response of Fixed-End Model Piles Considering Local Scour
Publisher: ASCE
Abstract: The soil around offshore foundations usually suffers from local scour, which is widely believed to undermine the bearing capacity and serviceability of the foundations. However, the extent to which this undermining effect ...
Physical Modeling of Hydrate Dissociation in Sandy Sediment by Depressurization under Hypergravity and Normal Gravity Conditions
Publisher: American Society of Civil Engineers
Abstract: Geomechanical and heat transfer characteristics of gas hydrate-bearing sediment (GHBS) are significantly affected by hydrate dissociation during gas production from reservoirs, which is typically tens of meters in thickness. ...
Double Layer–Averaged Model of River Ice–Water Mixture Flow
Publisher: American Society of Civil Engineers
Abstract: River ice–water mixture flows are commonly occurring natural phenomena that have the potential to cause serious hazards. To date, however, the interactive processes between ice and water have remained poorly understood. ...
Centrifuge Modeling of Monotonic and Cyclic Lateral Behavior of Monopiles in Sand
Publisher: ASCE
Abstract: This paper presents a program of centrifuge model tests (100g) on the monotonic and cyclic lateral loading behavior of monopiles. The diameter and burial depth of the model pile were 59 and 550 mm, respectively, and ...