Analytical Equations and Numerical Simulation Describing the Pore and Solid Phase Distributions of Interfacial Transition Zones in Cement-Based MaterialsLong Bone Torsion: II. A Combined Experimental and Computational Method for Determining an Effective Shear Modulus

Abstract

A technique is established which allows an effective torsional shear modulus to be determined for long bones, while remaining nondestructive to whole bone specimens. Strain gages are bonded to the diaphysis of the bone. Strains are then recorded under pure torsional loads. Theoretical stress predictions are combined with experimental strain recordings to arrive at a modulus value. Shear modulus calculations for four canine radii are reported using theoretical stress predictions from circular, elliptical and finite element models of the transverse bone geometry. The effective shear modulus, obtained from an average of the shear moduli determined at strain gage locations, serves to average the heterogeneous shear modulus distribution over the cross section. The shear modulus obtained is that associated with the “circumferential” direction in transverse planes.