Show simple item record

contributor authorP. B. Usoro
contributor authorF. C. Schweppe
contributor authorD. N. Wormley
contributor authorL. A. Gould
date accessioned2017-05-08T23:12:53Z
date available2017-05-08T23:12:53Z
date copyrightDecember, 1982
date issued1982
identifier issn0022-0434
identifier otherJDSMAA-26074#331_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/95601
description abstractA Set-Theoretic approach to solving control problems is presented for systems with control and state constraints which are subjected to input disturbances. The input disturbance is modeled as an unknown-but-bounded process. The constraints on the states and controls are treated explicitly. The primary objective is to construct a control system that uses only available control effort to insure nonviolation of the prespecified state constraints in the presence of the input disturbance. Since the constraints are treated directly, this technique yields a design that satisfies the constraints. The effectiveness of Set-Theoretic control synthesis is evaluated by means of an example and by comparison with a specific Linear-Quadratic Control design procedure.
publisherThe American Society of Mechanical Engineers (ASME)
titleEllipsoidal Set-Theoretic Control Synthesis
typeJournal Paper
journal volume104
journal issue4
journal titleJournal of Dynamic Systems, Measurement, and Control
identifier doi10.1115/1.3139718
journal fristpage331
journal lastpage336
identifier eissn1528-9028
treeJournal of Dynamic Systems, Measurement, and Control:;1982:;volume( 104 ):;issue: 004
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record