Show simple item record

contributor authorJ. K. Hedrick
contributor authorR. J. Ravera
contributor authorJ. R. Anderes
date accessioned2017-05-08T22:58:11Z
date available2017-05-08T22:58:11Z
date copyrightDecember, 1975
date issued1975
identifier issn0022-0434
identifier otherJDSMAA-26032#408_1.pdf
identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/87243
description abstractIn this paper the ride quality of a vehicle traversing an elevated guideway is related directly to guideway construction tolerances and design parameters. Moreover, the construction tolerances are modeled in terms familiar to a guideway contractor. The tolerances modeled for an elevated, two-span semicontinuous, concrete guideway are: surface finish, camber deviations, pier survey errors, and pier settlement. The major design parameters relating to live-load deflection, stiffness (material and cross-section), and pier spacing are included. A general technique is presented for relating these tolerances to vehicle ride quality by means of a digital computer simulation. Various ride quality criteria are considered, including rms acceleration, acceleration spectral density, acceleration frequency decomposition, and a deterministic state space boundary. Numerical results are presented for a particular vehicle-guideway configuration and as such are valid only for the system considered. It is shown that for this system, equivalent ride quality can be maintained while adjusting the various construction tolerances. This trade-off capability allows the contractor to choose the least costly combination of tolerance parameters.
publisherThe American Society of Mechanical Engineers (ASME)
titleThe Effect of Elevated Guideway Construction Tolerances on Vehicle Ride Quality
typeJournal Paper
journal volume97
journal issue4
journal titleJournal of Dynamic Systems, Measurement, and Control
identifier doi10.1115/1.3426957
journal fristpage408
journal lastpage416
identifier eissn1528-9028
keywordsConstruction
keywordsVehicles
keywordsDesign
keywordsConcretes
keywordsComputer simulation
keywordsDeflection
keywordsErrors
keywordsStiffness
keywordsFinishes
keywordsSpectral energy distribution AND Pavement live loads
treeJournal of Dynamic Systems, Measurement, and Control:;1975:;volume( 097 ):;issue: 004
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record