Effects of Bed Roughness on Flow around Bed-Mounted Cylinders in Open Channels

Abstract

This paper presents the results of an experimental study of flow around cylindrical objects on a rough bed in an open channel. This is an extension of a previous study of flow around cylinders on a smooth bed. The purpose of this study is to explore the effects of bed roughness on the characteristics of the deflected flow around cylindrical objects and the resulting bed-shear stress distributions. Similar to the previous study cylindrical objects of equal diameter and four heights were tested under similar flow conditions producing four different levels of submergence. Bed shear stress and deflected flow velocities were measured by a thin yaw-type Preston probe after a set of flow visualization tests. Flow visualization tests showed that the horse-shoe vortex systems on the rough bed occupy a relatively greater width compared to the smooth bed. Unlike smooth bed observations, the flow separation point upstream of the cylinder was not dependent on the level of submergence as the separation points were found to appear within a short range of