YaBeSH Engineering and Technology Library

    • Journals
    • PaperQuest
    • YSE Standards
    • YaBeSH
    • Login
    View Item 
    •   YE&T Library
    • ASCE
    • Journal of Composites for Construction
    • View Item
    •   YE&T Library
    • ASCE
    • Journal of Composites for Construction
    • View Item
    • All Fields
    • Source Title
    • Year
    • Publisher
    • Title
    • Subject
    • Author
    • DOI
    • ISBN
    Advanced Search
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Archive

    Functionally Graded Adhesive Patch Repairs of Wood Beams in Civil Applications

    Source: Journal of Composites for Construction:;2015:;Volume ( 019 ):;issue: 002
    Author:
    R. J. C. Carbas
    ,
    G. M. S. O. Viana
    ,
    L. F. M. da Silva
    ,
    G. W. Critchlow
    DOI: 10.1061/(ASCE)CC.1943-5614.0000500
    Publisher: American Society of Civil Engineers
    Abstract: Several investigations have been made concerning the fracture behavior of scaled specimens of wood beams repaired with adhesively bonded carbon fiber reinforced polymer (CFRP). However, one of the problems associated to these joints is the fact that the stress distribution (shear and peel) is concentrated at the ends of the overlap, leading to premature failure of the joint. The stress concentration can be reduced with use of a functionally graded adhesive, in which the mechanical properties vary along the bond length. This can be achieved with a graded cure, in which the temperature varies along the bond length. In this study, the repair of wood structures with CFRP was made using a homogeneous cure and a graded cure. The graded cure was performed by induction heating. This technique has already been successfully tested in single lap joints to increase the strength of the joint. Two common types of defects on beams under bending loads were analyzed (compression and cross grain tension damage). Scaled specimens of damaged wood beams were repaired and tested under four point bending. The results show that the cross grain tension beams repaired with a graded bondline were able to withstand higher loads than the beams repaired with a homogeneous bondline. This failure load of the graded repaired beam increases with an increase of the overlap length.
    • Download: (6.709Mb)
    • Show Full MetaData Hide Full MetaData
    • Get RIS
    • Item Order
    • Go To Publisher
    • Statistics

      Functionally Graded Adhesive Patch Repairs of Wood Beams in Civil Applications

    URI
    https://yetl.yabesh.ir/yetl1/handle/yetl/76558
    Collections
    • Journal of Composites for Construction

    Show full item record

    contributor authorR. J. C. Carbas
    contributor authorG. M. S. O. Viana
    contributor authorL. F. M. da Silva
    contributor authorG. W. Critchlow
    date accessioned2017-05-08T22:17:42Z
    date available2017-05-08T22:17:42Z
    date copyrightApril 2015
    date issued2015
    identifier other40131632.pdf
    identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/76558
    description abstractSeveral investigations have been made concerning the fracture behavior of scaled specimens of wood beams repaired with adhesively bonded carbon fiber reinforced polymer (CFRP). However, one of the problems associated to these joints is the fact that the stress distribution (shear and peel) is concentrated at the ends of the overlap, leading to premature failure of the joint. The stress concentration can be reduced with use of a functionally graded adhesive, in which the mechanical properties vary along the bond length. This can be achieved with a graded cure, in which the temperature varies along the bond length. In this study, the repair of wood structures with CFRP was made using a homogeneous cure and a graded cure. The graded cure was performed by induction heating. This technique has already been successfully tested in single lap joints to increase the strength of the joint. Two common types of defects on beams under bending loads were analyzed (compression and cross grain tension damage). Scaled specimens of damaged wood beams were repaired and tested under four point bending. The results show that the cross grain tension beams repaired with a graded bondline were able to withstand higher loads than the beams repaired with a homogeneous bondline. This failure load of the graded repaired beam increases with an increase of the overlap length.
    publisherAmerican Society of Civil Engineers
    titleFunctionally Graded Adhesive Patch Repairs of Wood Beams in Civil Applications
    typeJournal Paper
    journal volume19
    journal issue2
    journal titleJournal of Composites for Construction
    identifier doi10.1061/(ASCE)CC.1943-5614.0000500
    treeJournal of Composites for Construction:;2015:;Volume ( 019 ):;issue: 002
    contenttypeFulltext
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian
     
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian