YaBeSH Engineering and Technology Library

    • Journals
    • PaperQuest
    • YSE Standards
    • YaBeSH
    • Login
    View Item 
    •   YE&T Library
    • ASCE
    • Journal of Geotechnical and Geoenvironmental Engineering
    • View Item
    •   YE&T Library
    • ASCE
    • Journal of Geotechnical and Geoenvironmental Engineering
    • View Item
    • All Fields
    • Source Title
    • Year
    • Publisher
    • Title
    • Subject
    • Author
    • DOI
    • ISBN
    Advanced Search
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Archive

    Effect of Gas on the Mechanical Behavior of Medium-Dense Sands

    Source: Journal of Geotechnical and Geoenvironmental Engineering:;2014:;Volume ( 140 ):;issue: 011
    Author:
    Carlos A.
    ,
    Vega-Posada
    ,
    Richard J.
    ,
    Finno
    ,
    David G.
    ,
    Zapata-Medina
    DOI: 10.1061/(ASCE)GT.1943-5606.0001163
    Publisher: American Society of Civil Engineers
    Abstract: This paper presents the results of monotonic and cyclic triaxial tests performed on gassy, medium-dense sand specimens. These sands are representative of conditions in a loose-sand deposit that was densified using multiple blasting passes at a site in South Carolina. The equipment and laboratory testing procedures used to reproduce the postblast densification conditions observed at a field test are described in detail. Results of undrained and drained compression tests showed that the gassy-specimen responses were bounded by the fully saturated drained and undrained responses. The undrained test results showed that the presence of gas, even in small amounts, made the soil more compressible and restricted the buildup of excess pore-water pressures as compared with those pressures observed in fully saturated specimens. Additionally, the shear strengths of gassy, medium-dense sand specimens were similar to those observed in saturated, loose sands sheared under drained conditions. For a given cyclic stress ratio and number of cycles, the axial strains and excess pore-water pressures were significantly smaller than those for a saturated specimen with the same void ratio. Implications of the behavior of such blast-densified sands are discussed.
    • Download: (1.893Mb)
    • Show Full MetaData Hide Full MetaData
    • Get RIS
    • Item Order
    • Go To Publisher
    • Statistics

      Effect of Gas on the Mechanical Behavior of Medium-Dense Sands

    URI
    https://yetl.yabesh.ir/yetl1/handle/yetl/72133
    Collections
    • Journal of Geotechnical and Geoenvironmental Engineering

    Show full item record

    contributor authorCarlos A.
    contributor authorVega-Posada
    contributor authorRichard J.
    contributor authorFinno
    contributor authorDavid G.
    contributor authorZapata-Medina
    date accessioned2017-05-08T22:08:24Z
    date available2017-05-08T22:08:24Z
    date copyrightNovember 2014
    date issued2014
    identifier other32285736.pdf
    identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/72133
    description abstractThis paper presents the results of monotonic and cyclic triaxial tests performed on gassy, medium-dense sand specimens. These sands are representative of conditions in a loose-sand deposit that was densified using multiple blasting passes at a site in South Carolina. The equipment and laboratory testing procedures used to reproduce the postblast densification conditions observed at a field test are described in detail. Results of undrained and drained compression tests showed that the gassy-specimen responses were bounded by the fully saturated drained and undrained responses. The undrained test results showed that the presence of gas, even in small amounts, made the soil more compressible and restricted the buildup of excess pore-water pressures as compared with those pressures observed in fully saturated specimens. Additionally, the shear strengths of gassy, medium-dense sand specimens were similar to those observed in saturated, loose sands sheared under drained conditions. For a given cyclic stress ratio and number of cycles, the axial strains and excess pore-water pressures were significantly smaller than those for a saturated specimen with the same void ratio. Implications of the behavior of such blast-densified sands are discussed.
    publisherAmerican Society of Civil Engineers
    titleEffect of Gas on the Mechanical Behavior of Medium-Dense Sands
    typeJournal Paper
    journal volume140
    journal issue11
    journal titleJournal of Geotechnical and Geoenvironmental Engineering
    identifier doi10.1061/(ASCE)GT.1943-5606.0001163
    treeJournal of Geotechnical and Geoenvironmental Engineering:;2014:;Volume ( 140 ):;issue: 011
    contenttypeFulltext
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian
     
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian