Comparison of CFRP and Alternative Seismic Retrofitting Techniques for Bare and Infilled RC FramesSource: Journal of Composites for Construction:;2011:;Volume ( 015 ):;issue: 004Author:D. Kakaletsis
DOI: 10.1061/(ASCE)CC.1943-5614.0000196Publisher: American Society of Civil Engineers
Abstract: The opportunities provided by the use of modern repair schemes for the seismic retrofit of existing RC structures were assessed on a comparative experimental study of carbon fiber-reinforced polymer (CFRP) and more-conventional seismic retrofitting techniques for the repair of reinforced concrete members and masonry walls of bare and infilled RC frames, respectively, damaged because of cyclic loading. Four 1-story, one-bay, one-third-scale frame specimens are tested under cyclic horizontal loading up to a drift level of 4%—two bare frames with spirals or stirrups as shear reinforcement, respectively, and two infilled frames with weak infills and spirals or stirrups as shear reinforcement, respectively. The applied repair techniques are mainly based on the use of thin epoxy resin infused under pressure into the crack system of the damaged RC joint bodies or on the additional use of CFRP plates to the surfaces of the damaged structural RC members as external reinforcement and the use of a polymer modified cement mortar or two-sided diagonal CFRP fabrics for the damaged infill masonry walls. After repair, specimens were retested in the same way. Conclusions concerning the comparison of the effectiveness between conventional and CFRP seismic retrofitting applied techniques on the basis of maximum cycles load, loading stiffness, and hysteretic energy absorption capabilities of the tested specimens are drawn.
|
Collections
Show full item record
| contributor author | D. Kakaletsis | |
| date accessioned | 2017-05-08T21:36:21Z | |
| date available | 2017-05-08T21:36:21Z | |
| date copyright | August 2011 | |
| date issued | 2011 | |
| identifier other | %28asce%29cc%2E1943-5614%2E0000199.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/57322 | |
| description abstract | The opportunities provided by the use of modern repair schemes for the seismic retrofit of existing RC structures were assessed on a comparative experimental study of carbon fiber-reinforced polymer (CFRP) and more-conventional seismic retrofitting techniques for the repair of reinforced concrete members and masonry walls of bare and infilled RC frames, respectively, damaged because of cyclic loading. Four 1-story, one-bay, one-third-scale frame specimens are tested under cyclic horizontal loading up to a drift level of 4%—two bare frames with spirals or stirrups as shear reinforcement, respectively, and two infilled frames with weak infills and spirals or stirrups as shear reinforcement, respectively. The applied repair techniques are mainly based on the use of thin epoxy resin infused under pressure into the crack system of the damaged RC joint bodies or on the additional use of CFRP plates to the surfaces of the damaged structural RC members as external reinforcement and the use of a polymer modified cement mortar or two-sided diagonal CFRP fabrics for the damaged infill masonry walls. After repair, specimens were retested in the same way. Conclusions concerning the comparison of the effectiveness between conventional and CFRP seismic retrofitting applied techniques on the basis of maximum cycles load, loading stiffness, and hysteretic energy absorption capabilities of the tested specimens are drawn. | |
| publisher | American Society of Civil Engineers | |
| title | Comparison of CFRP and Alternative Seismic Retrofitting Techniques for Bare and Infilled RC Frames | |
| type | Journal Paper | |
| journal volume | 15 | |
| journal issue | 4 | |
| journal title | Journal of Composites for Construction | |
| identifier doi | 10.1061/(ASCE)CC.1943-5614.0000196 | |
| tree | Journal of Composites for Construction:;2011:;Volume ( 015 ):;issue: 004 | |
| contenttype | Fulltext |