| contributor author | David T. Borowicz | |
| contributor author | Lawrence C. Bank | |
| date accessioned | 2017-05-08T21:36:08Z | |
| date available | 2017-05-08T21:36:08Z | |
| date copyright | April 2011 | |
| date issued | 2011 | |
| identifier other | %28asce%29cc%2E1943-5614%2E0000086.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/57197 | |
| description abstract | Results of the behavior of pultruded fiber-reinforced polymer (FRP) I-shaped beams subjected to concentrated loads in the plane of the web are presented. Twenty beams with nominal depths from 152.4 to 304.8 mm were tested in three-point bending with a span-to-depth ratio of four. Load was applied to the top flange directly above the web—12 without bearing plates and 8 with bearing plates of varying width and thickness. All test specimens failed with a wedgelike shear failure at the upper web-flange junction. Finite-element results support experimental findings from strain gauge and digital image correlation data. Bearing plates increased beam capacity by 35% or more as a function of bearing plate width and thickness. Bearing plates increased average shear stress in the web at failure from 17.4 to 27.2 MPa—below the accepted value of in-plane shear strength (69 MPa). A design equation is presented, and predicted capacities are compared with experimental results. The average value of experimental capacity to predicted capacity is 1.12 with a standard deviation of 0.11 and coefficient of variation (COV) of 0.10 for sections up to 304.8 mm deep. | |
| publisher | American Society of Civil Engineers | |
| title | Behavior of Pultruded Fiber-Reinforced Polymer Beams Subjected to Concentrated Loads in the Plane of the Web | |
| type | Journal Paper | |
| journal volume | 15 | |
| journal issue | 2 | |
| journal title | Journal of Composites for Construction | |
| identifier doi | 10.1061/(ASCE)CC.1943-5614.0000082 | |
| tree | Journal of Composites for Construction:;2011:;Volume ( 015 ):;issue: 002 | |
| contenttype | Fulltext | |