YaBeSH Engineering and Technology Library

    • Journals
    • PaperQuest
    • YSE Standards
    • YaBeSH
    • Login
    View Item 
    •   YE&T Library
    • ASCE
    • Journal of Composites for Construction
    • View Item
    •   YE&T Library
    • ASCE
    • Journal of Composites for Construction
    • View Item
    • All Fields
    • Source Title
    • Year
    • Publisher
    • Title
    • Subject
    • Author
    • DOI
    • ISBN
    Advanced Search
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Archive

    Tests and Analysis of Cantilevered GFRP Tubular Poles with Partial Concrete Filling

    Source: Journal of Composites for Construction:;2010:;Volume ( 014 ):;issue: 001
    Author:
    Jeffrey Mitchell
    ,
    Amir Fam
    DOI: 10.1061/(ASCE)CC.1943-5614.0000041
    Publisher: American Society of Civil Engineers
    Abstract: In this study, six glass fiber-reinforced polymer (GFRP) cantilevered tubular poles were tested in flexure. Four poles were filled with varying amounts of concrete; within 13, 30, 51, and 72% of their lengths, from the fixed point. Two poles, namely, a hollow and a totally concrete-filled tubes, were also tested as control specimens. The filament-wound prismatic tubes were 3,660 mm long, including a 700 mm clamped length at the fixed end, with a 220 mm outer diameter, and 4.15 mm wall thickness. The study aims at increasing flexural strength of thin-walled GFRP tubular poles by using a small amount of concrete at the vicinity of maximum moment near the base. Test results showed that flexural strength increases as the length of concrete fill is increased, until it reaches a plateau corresponding to about double the strength of the hollow tube, when the concrete fill is about one third of the clear length. This is considered the optimal condition for this tube that provides the largest strength-to-weight ratio. Poles with a shorter filling length failed prematurely, by a combined local buckling and crushing of the hollow part, while poles with a longer filling length failed at the base by rupture of the tube in tension. An analytical model was developed, validated, and used in a parametric study. The correlations between the optimal filling length ratio and both “diameter-to-thickness” ratio, and laminate structure of the tube, have been demonstrated for both angle-ply and cross-ply tubes.
    • Download: (1.159Mb)
    • Show Full MetaData Hide Full MetaData
    • Get RIS
    • Item Order
    • Go To Publisher
    • Statistics

      Tests and Analysis of Cantilevered GFRP Tubular Poles with Partial Concrete Filling

    URI
    https://yetl.yabesh.ir/yetl1/handle/yetl/57155
    Collections
    • Journal of Composites for Construction

    Show full item record

    contributor authorJeffrey Mitchell
    contributor authorAmir Fam
    date accessioned2017-05-08T21:36:04Z
    date available2017-05-08T21:36:04Z
    date copyrightFebruary 2010
    date issued2010
    identifier other%28asce%29cc%2E1943-5614%2E0000044.pdf
    identifier urihttp://yetl.yabesh.ir/yetl/handle/yetl/57155
    description abstractIn this study, six glass fiber-reinforced polymer (GFRP) cantilevered tubular poles were tested in flexure. Four poles were filled with varying amounts of concrete; within 13, 30, 51, and 72% of their lengths, from the fixed point. Two poles, namely, a hollow and a totally concrete-filled tubes, were also tested as control specimens. The filament-wound prismatic tubes were 3,660 mm long, including a 700 mm clamped length at the fixed end, with a 220 mm outer diameter, and 4.15 mm wall thickness. The study aims at increasing flexural strength of thin-walled GFRP tubular poles by using a small amount of concrete at the vicinity of maximum moment near the base. Test results showed that flexural strength increases as the length of concrete fill is increased, until it reaches a plateau corresponding to about double the strength of the hollow tube, when the concrete fill is about one third of the clear length. This is considered the optimal condition for this tube that provides the largest strength-to-weight ratio. Poles with a shorter filling length failed prematurely, by a combined local buckling and crushing of the hollow part, while poles with a longer filling length failed at the base by rupture of the tube in tension. An analytical model was developed, validated, and used in a parametric study. The correlations between the optimal filling length ratio and both “diameter-to-thickness” ratio, and laminate structure of the tube, have been demonstrated for both angle-ply and cross-ply tubes.
    publisherAmerican Society of Civil Engineers
    titleTests and Analysis of Cantilevered GFRP Tubular Poles with Partial Concrete Filling
    typeJournal Paper
    journal volume14
    journal issue1
    journal titleJournal of Composites for Construction
    identifier doi10.1061/(ASCE)CC.1943-5614.0000041
    treeJournal of Composites for Construction:;2010:;Volume ( 014 ):;issue: 001
    contenttypeFulltext
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian
     
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian