Development of a Specification for Bridge Seismic Retrofit with Carbon Fiber Reinforced Polymer CompositesSource: Journal of Composites for Construction:;2004:;Volume ( 008 ):;issue: 001DOI: 10.1061/(ASCE)1090-0268(2004)8:1(88)Publisher: American Society of Civil Engineers
Abstract: The U.S. Interstate 80 bridge over State Street in Salt Lake City is very near the Wasatch fault, which is active and capable of producing large earthquakes. The bridge was designed and built in 1965 according to the 1961 American Association of State Highway Officials specifications, which did not consider earthquake-induced forces or displacements. The bridge consists of reinforced concrete bents supporting steel plate welded girders. The bents are supported on cast-in-place concrete piles and pile caps. A seismic retrofit design was developed using carbon fiber reinforced polymer (CFRP) composites, which was implemented in the summer of 2000 and the summer of 2001, to improve the displacement ductility of the bridge. The seismic retrofit included column jacketing, as well as wrapping of the bent cap and bent cap-column joints for confinement, flexural, and shear strength increase. This paper describes the specifications developed for the CFRP composite column jackets and composite bent wrap. The specifications included provisions for materials, constructed thickness based on strength capacity, and an environmental durability reduction factor. Surface preparation, finish coat requirements, quality assurance provisions, which included sampling and testing, and constructability issues regarding the application of fiber composite materials in the retrofit of concrete bridges are also described.
|
Collections
Show full item record
| contributor author | Chris P. Pantelides | |
| contributor author | Larry Cercone | |
| contributor author | Frederick Policelli | |
| date accessioned | 2017-05-08T21:30:36Z | |
| date available | 2017-05-08T21:30:36Z | |
| date copyright | February 2004 | |
| date issued | 2004 | |
| identifier other | %28asce%291090-0268%282004%298%3A1%2888%29.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/54218 | |
| description abstract | The U.S. Interstate 80 bridge over State Street in Salt Lake City is very near the Wasatch fault, which is active and capable of producing large earthquakes. The bridge was designed and built in 1965 according to the 1961 American Association of State Highway Officials specifications, which did not consider earthquake-induced forces or displacements. The bridge consists of reinforced concrete bents supporting steel plate welded girders. The bents are supported on cast-in-place concrete piles and pile caps. A seismic retrofit design was developed using carbon fiber reinforced polymer (CFRP) composites, which was implemented in the summer of 2000 and the summer of 2001, to improve the displacement ductility of the bridge. The seismic retrofit included column jacketing, as well as wrapping of the bent cap and bent cap-column joints for confinement, flexural, and shear strength increase. This paper describes the specifications developed for the CFRP composite column jackets and composite bent wrap. The specifications included provisions for materials, constructed thickness based on strength capacity, and an environmental durability reduction factor. Surface preparation, finish coat requirements, quality assurance provisions, which included sampling and testing, and constructability issues regarding the application of fiber composite materials in the retrofit of concrete bridges are also described. | |
| publisher | American Society of Civil Engineers | |
| title | Development of a Specification for Bridge Seismic Retrofit with Carbon Fiber Reinforced Polymer Composites | |
| type | Journal Paper | |
| journal volume | 8 | |
| journal issue | 1 | |
| journal title | Journal of Composites for Construction | |
| identifier doi | 10.1061/(ASCE)1090-0268(2004)8:1(88) | |
| tree | Journal of Composites for Construction:;2004:;Volume ( 008 ):;issue: 001 | |
| contenttype | Fulltext |