Mechanical, Rheological, and Microstructural Study of Ternary Alkali-Activated Pastes Using BOF Slag, Metakaolin, and Glass Powder as Precursors

Abstract

The study of alkali-activated materials as a replacement for portland cement has been growing in recent years due to the sustainable nature of these materials. Nevertheless, ternary alkali-activated pastes using waste glass as a precursor have been insufficiently studied concerning their rheological, mechanical, and microstructural properties. In addition, there is a lack of research studying alkali-activated mixtures using basic oxygen furnace (BOF) slag and glass waste as precursors. Therefore, this paper aims to study the effect of glass powder (GP) content as a precursor, the effect of the activator ratio in alkali-activated ternary pastes of BOF slag, metakaolin (MK), and GP, and the influence of the Na2SiO3/NaOH ratio on its mixtures. The activator solutions of NaOH and Na2SiO3/NaOH were used in the production of the pastes. The liquid/solid ratio was kept fixed at 0.6 and the molarity of the NaOH solution was fixed at 12 M, seeking to analyze the impact of the Na2SiO3/NaOH ratio, with adopted values of 0.75, 1.5, and 2.5. We also aimed to study the impact of the glass content in the mixture for the values of 10%, 20%, and 25%, replacing the BOF slag. The workability by the minislump test, rheology, compressive strength for 1 and 28 days, and microstructural parameters were analyzed. ANOVA was performed to determine the significance of variables in the workability and compressive strength parameters. Pastes with the highest activator ratio (Na2SiO3/NaOH=2.5) produced better compressive strength (34.74 to 36.11 MPa) and lower minislump spreads (90 to 98 mm) compared with the mixtures with Na2SiO3/NaOH=1.5 and 0.75, besides indicating a denser microstructure, linked to higher production of aluminosilicate gels. Higher GP contents generated pastes with lower mechanical performance (16.7 MPa for Na2SiO3/NaOH=0.75) and microstructural qualities, albeit with better workability (124-mm minislump spread).