Numerical Simulations of Aircraft Engine Ring Gear Quenching by Using Mean Field Model of Phase Transformations in Pyroware Steel 53Source: Journal of Aerospace Engineering:;2023:;Volume ( 036 ):;issue: 006::page 04023079-1Author:Łukasz Rauch
,
Władysław Zalecki
,
Roman Kuziak
,
Bogdan Garbarz
,
Krzysztof Raga
,
Krzysztof Bzowski
,
Maciej Pietrzyk
DOI: 10.1061/JAEEEZ.ASENG-5014Publisher: ASCE
Abstract: Development of the fast model of phase transformations in the Pyrowear 53 steel was the objective of the paper. An upgrade of the JMAK (Johnson–Mehl–Avrami–Kolmogorov) was proposed. Coefficients in the model were introduced as modified Gauss functions of the temperature. Changes in the carbon and molybdenum concentrations due to precipitation were accounted for. Dilatometric tests were carried out across a wide range of cooling rates. Identification of the model was performed using inverse analysis for the results of these tests. Three austenitization cycles prior to transformations were applied and an influence of the grain size on the nucleation and kinetics of phase transformations was accounted for in the model. All the tests were carried out on the core samples with the nominal chemical composition and on the carburized samples. Numerical tests confirmed the good accuracy of the model for both compositions in the whole investigated range of the grain size.
|
Collections
Show full item record
| contributor author | Łukasz Rauch | |
| contributor author | Władysław Zalecki | |
| contributor author | Roman Kuziak | |
| contributor author | Bogdan Garbarz | |
| contributor author | Krzysztof Raga | |
| contributor author | Krzysztof Bzowski | |
| contributor author | Maciej Pietrzyk | |
| date accessioned | 2023-11-27T23:05:59Z | |
| date available | 2023-11-27T23:05:59Z | |
| date issued | 8/30/2023 12:00:00 AM | |
| date issued | 2023-08-30 | |
| identifier other | JAEEEZ.ASENG-5014.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl1/handle/yetl/4293287 | |
| description abstract | Development of the fast model of phase transformations in the Pyrowear 53 steel was the objective of the paper. An upgrade of the JMAK (Johnson–Mehl–Avrami–Kolmogorov) was proposed. Coefficients in the model were introduced as modified Gauss functions of the temperature. Changes in the carbon and molybdenum concentrations due to precipitation were accounted for. Dilatometric tests were carried out across a wide range of cooling rates. Identification of the model was performed using inverse analysis for the results of these tests. Three austenitization cycles prior to transformations were applied and an influence of the grain size on the nucleation and kinetics of phase transformations was accounted for in the model. All the tests were carried out on the core samples with the nominal chemical composition and on the carburized samples. Numerical tests confirmed the good accuracy of the model for both compositions in the whole investigated range of the grain size. | |
| publisher | ASCE | |
| title | Numerical Simulations of Aircraft Engine Ring Gear Quenching by Using Mean Field Model of Phase Transformations in Pyroware Steel 53 | |
| type | Journal Article | |
| journal volume | 36 | |
| journal issue | 6 | |
| journal title | Journal of Aerospace Engineering | |
| identifier doi | 10.1061/JAEEEZ.ASENG-5014 | |
| journal fristpage | 04023079-1 | |
| journal lastpage | 04023079-10 | |
| page | 10 | |
| tree | Journal of Aerospace Engineering:;2023:;Volume ( 036 ):;issue: 006 | |
| contenttype | Fulltext |