Show simple item record

contributor authorHart, Keir
contributor authorSalvino, Chris
contributor authorPashak, Todd
contributor authorVeatch, Brad
date accessioned2023-08-16T18:45:19Z
date available2023-08-16T18:45:19Z
date copyright4/17/2023 12:00:00 AM
date issued2023
identifier issn1932-6181
identifier othermed_017_02_024502.pdf
identifier urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4292438
description abstractEndotracheal (ET) Intubation is a medical procedure whereupon a physician or trained personnel inserts a breathing tube into a patient's mouth, through their vocal cords, and into their trachea. Intubation can be lifesaving when a patient cannot breathe on their own. Intubations are performed routinely, with approximately 15 × 106 performed annually just in the operating room (OR) with an additional 650,000 intubations in the wider hospital environment. Intubation is a complex, dynamic, and at times difficult procedure with major consequences if delayed and/or if the procedure fails. Complications for intubations outside of the operating room are reported as high as 27%, with the most common being hypoxia, or low oxygen levels. We have developed a simple, sterile attachment that directs oxygen down endotracheal tubes during intubation. Benchtop studies have demonstrated acceptable pressures well below those leading to barotrauma. In animal studies, the device has been shown to significantly reduce hypoxia; thereby increasing the time a medical provider has to safely perform the procedure. While further development is warranted, as well as additional testing both in vitro and in vivo, the cap assembly appears to provide a viable solution to a persistent and dangerous problem in medicine.
publisherThe American Society of Mechanical Engineers (ASME)
titleDevelopment of an Endotracheal Tube Cap for Oxygen Delivery During Intubation
typeJournal Paper
journal volume17
journal issue2
journal titleJournal of Medical Devices
identifier doi10.1115/1.4062151
journal fristpage24502-1
journal lastpage24502-6
page6
treeJournal of Medical Devices:;2023:;volume( 017 ):;issue: 002
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record