YaBeSH Engineering and Technology Library

    • Journals
    • PaperQuest
    • YSE Standards
    • YaBeSH
    • Login
    View Item 
    •   YE&T Library
    • ASME
    • Journal of Applied Mechanics
    • View Item
    •   YE&T Library
    • ASME
    • Journal of Applied Mechanics
    • View Item
    • All Fields
    • Source Title
    • Year
    • Publisher
    • Title
    • Subject
    • Author
    • DOI
    • ISBN
    Advanced Search
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Archive

    Buckling of a Vertically Mounted Cantilevered Plate Under Static Torsional Corner Loads—Experiment and Theory

    Source: Journal of Applied Mechanics:;2023:;volume( 090 ):;issue: 006::page 61004-1
    Author:
    Gibson, Oliver S.
    ,
    Knotek, Chris
    ,
    Virgin, Lawrence
    ,
    Dowell, Earl
    DOI: 10.1115/1.4056859
    Publisher: The American Society of Mechanical Engineers (ASME)
    Abstract: The results of an experimental study on the buckling of a vertically cantilevered plate under corner twisting forces are reported. In this configuration, an interesting and somewhat counter-intuitive behavior is observed in which a laterally loaded slender panel exhibits a subtle instability characterized by nonlinear out-of-plane corner deflections. This is one of the few studies in the literature that investigates the buckling of cantilevered plates and appears to be the only experimental study of buckling under twisting loads, i.e., loading the plate with point loads at the free corners and in opposite directions. This paper discusses the practical aspects of experimental verification and methodology and evaluates the effect of the plate aspect ratio (AR) on the nondimensional buckling load in this configuration. In addition, experimental results are compared to finite element analysis (FEA) simulations performed on accessible software. There is generally good agreement between the experiment and the finite element simulation for the change of buckling load with plate aspect ratio. The nondimensional buckling load appears to decrease asymptotically with increasing aspect ratio, though the correlation between experiment and computation is less consistent as aspect ratio increases due to experimental and computational limitations.
    • Download: (1.007Mb)
    • Show Full MetaData Hide Full MetaData
    • Get RIS
    • Item Order
    • Go To Publisher
    • Statistics

      Buckling of a Vertically Mounted Cantilevered Plate Under Static Torsional Corner Loads—Experiment and Theory

    URI
    https://yetl.yabesh.ir/yetl1/handle/yetl/4292040
    Collections
    • Journal of Applied Mechanics

    Show full item record

    contributor authorGibson, Oliver S.
    contributor authorKnotek, Chris
    contributor authorVirgin, Lawrence
    contributor authorDowell, Earl
    date accessioned2023-08-16T18:29:36Z
    date available2023-08-16T18:29:36Z
    date copyright2/22/2023 12:00:00 AM
    date issued2023
    identifier issn0021-8936
    identifier otherjam_90_6_061004.pdf
    identifier urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4292040
    description abstractThe results of an experimental study on the buckling of a vertically cantilevered plate under corner twisting forces are reported. In this configuration, an interesting and somewhat counter-intuitive behavior is observed in which a laterally loaded slender panel exhibits a subtle instability characterized by nonlinear out-of-plane corner deflections. This is one of the few studies in the literature that investigates the buckling of cantilevered plates and appears to be the only experimental study of buckling under twisting loads, i.e., loading the plate with point loads at the free corners and in opposite directions. This paper discusses the practical aspects of experimental verification and methodology and evaluates the effect of the plate aspect ratio (AR) on the nondimensional buckling load in this configuration. In addition, experimental results are compared to finite element analysis (FEA) simulations performed on accessible software. There is generally good agreement between the experiment and the finite element simulation for the change of buckling load with plate aspect ratio. The nondimensional buckling load appears to decrease asymptotically with increasing aspect ratio, though the correlation between experiment and computation is less consistent as aspect ratio increases due to experimental and computational limitations.
    publisherThe American Society of Mechanical Engineers (ASME)
    titleBuckling of a Vertically Mounted Cantilevered Plate Under Static Torsional Corner Loads—Experiment and Theory
    typeJournal Paper
    journal volume90
    journal issue6
    journal titleJournal of Applied Mechanics
    identifier doi10.1115/1.4056859
    journal fristpage61004-1
    journal lastpage61004-8
    page8
    treeJournal of Applied Mechanics:;2023:;volume( 090 ):;issue: 006
    contenttypeFulltext
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian
     
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian