Show simple item record

contributor authorSharafkhani, Naser;Orwa, Julius O.;Adams, Scott D.;Long, John M.;Lissorgues, Gaëlle;Rousseau, Lionel;Kouzani, Abbas Z.
date accessioned2022-12-27T23:12:25Z
date available2022-12-27T23:12:25Z
date copyright7/28/2022 12:00:00 AM
date issued2022
identifier issn0021-8936
identifier otherjam_89_9_091008.pdf
identifier urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4288109
description abstractInsertion of a microprobe into the brain is challenging because it needs to have a minimum stiffness to be successfully implanted and a maximum softness to exhibit compliance with surrounding neural tissue during operation. A microprobe’s critical buckling force not only dictates the microprobe resistance to buckling during insertion but also reveals the corresponding compliance during operation. The methods that are currently used to insert flexible microprobes into the brain are far from perfect because they may adversely affect the microprobe intrinsic softness. In this article, a piezoelectric-based mechanism is presented, theoretically modeled, and simulated to precisely adjust the critical buckling force of a polyimide microprobe during insertion into the brain. Two parallel piezoelectric layers are extended along the length of a polyimide microprobe and connected to a voltage source. Based on analytical modeling and simulation results, placing the piezoelectric layers closer to the neutral axis of the structure leads to a microprobe with higher buckling capacity and greater compliance during insertion and operation, respectively. Depending on the applied voltage and the configurations of the microprobe and piezoelectric layers, the critical buckling force of the modified polyimide microprobe can be adjusted from less than 0.02 mN to higher than the minimum brain penetration force of 0.5 mN, compared to a fixed critical buckling force of a polyimide microprobe without the piezoelectric layer.
publisherThe American Society of Mechanical Engineers (ASME)
titleAn Intracortical Polyimide Microprobe With Piezoelectric-Based Stiffness Control
typeJournal Paper
journal volume89
journal issue9
journal titleJournal of Applied Mechanics
identifier doi10.1115/1.4054979
journal fristpage91008
journal lastpage91008_8
page8
treeJournal of Applied Mechanics:;2022:;volume( 089 ):;issue: 009
contenttypeFulltext


Files in this item

Thumbnail
This item appears in the following Collection(s)

Show simple item record