Enhancing TEM00-Mode Solar Laser With Beam Merging and Ring-Array ConcentratorSource: Journal of Solar Energy Engineering:;2022:;volume( 144 ):;issue: 006::page 61005-1DOI: 10.1115/1.4054666Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: It is reported here a large improvement in numerically calculated TEM00-mode side-pumped solar laser efficiency, and brightness figure-of-merit by pumping two thin Nd:YAG laser rods simultaneously with a ring-array solar energy primary concentrator. Two side-pumping configurations were investigated. A single-rod configuration was used to pump a typical single thick laser rod with the full collection area of the ring-array concentrator, and a dual-rod to pump two thin laser rods simultaneously. A three-folding-mirror laser beam merging technique was used, enabling the emission of only one laser beam from the two rods. For the dual-rod single laser beam configuration, 27.50 W continuous-wave TEM00-mode solar laser output power was numerically achieved, corresponding to 16.10 W/m2 TEM00-mode solar laser collection efficiency, 1.70% solar-to-laser power conversion efficiency, 25.00 W brightness figure-of-merit, and 1.54% brightness conversion efficiency, being 1.46, 1.30, 1.75, and 1.40 times, respectively, higher than the previous numerical records, and also 2.04, 1.60, 3.87, and 2.03 times, respectively, more than the previous state-of-the-art experimental records.
|
Collections
Show full item record
| contributor author | Tibúrcio | |
| contributor author | B. D.;Liang | |
| contributor author | D.;Almeida | |
| contributor author | J.;Garcia | |
| contributor author | D.;Catela | |
| contributor author | M.;Costa | |
| contributor author | H.;Vistas | |
| contributor author | C. R. | |
| date accessioned | 2022-08-18T13:05:59Z | |
| date available | 2022-08-18T13:05:59Z | |
| date copyright | 6/13/2022 12:00:00 AM | |
| date issued | 2022 | |
| identifier issn | 0199-6231 | |
| identifier other | sol_144_6_061005.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl1/handle/yetl/4287434 | |
| description abstract | It is reported here a large improvement in numerically calculated TEM00-mode side-pumped solar laser efficiency, and brightness figure-of-merit by pumping two thin Nd:YAG laser rods simultaneously with a ring-array solar energy primary concentrator. Two side-pumping configurations were investigated. A single-rod configuration was used to pump a typical single thick laser rod with the full collection area of the ring-array concentrator, and a dual-rod to pump two thin laser rods simultaneously. A three-folding-mirror laser beam merging technique was used, enabling the emission of only one laser beam from the two rods. For the dual-rod single laser beam configuration, 27.50 W continuous-wave TEM00-mode solar laser output power was numerically achieved, corresponding to 16.10 W/m2 TEM00-mode solar laser collection efficiency, 1.70% solar-to-laser power conversion efficiency, 25.00 W brightness figure-of-merit, and 1.54% brightness conversion efficiency, being 1.46, 1.30, 1.75, and 1.40 times, respectively, higher than the previous numerical records, and also 2.04, 1.60, 3.87, and 2.03 times, respectively, more than the previous state-of-the-art experimental records. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | Enhancing TEM00-Mode Solar Laser With Beam Merging and Ring-Array Concentrator | |
| type | Journal Paper | |
| journal volume | 144 | |
| journal issue | 6 | |
| journal title | Journal of Solar Energy Engineering | |
| identifier doi | 10.1115/1.4054666 | |
| journal fristpage | 61005-1 | |
| journal lastpage | 61005-10 | |
| page | 10 | |
| tree | Journal of Solar Energy Engineering:;2022:;volume( 144 ):;issue: 006 | |
| contenttype | Fulltext |