Show simple item record

contributor authorMei, Mingming
contributor authorCheng, Shuo
contributor authorLi, Liang
contributor authorYan, Bingjie
date accessioned2022-05-08T09:04:34Z
date available2022-05-08T09:04:34Z
date copyright3/7/2022 12:00:00 AM
date issued2022
identifier issn0022-0434
identifier otherds_144_05_051008.pdf
identifier urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4284700
description abstractBased on the guaranteed cost theory, this paper proposes a robust controller for the automotive electrohydraulic coupling system. However, parameter perturbation caused by the model linearization is a critical challenge for the nonlinear electrohydraulic coupling system. Generally, the electrical brake booster system (E-booster) can be separated into three parts, a permanent magnet synchronous motor (PMSM), a hydraulic model of the master cylinder, and the transmission mechanism. In this paper, the robust guaranteed cost controller (RGCC) is adopted to achieve an accurate regulation of the pushrod position of the E-booster and has strong robustness against internal uncertainties, and the linear extended state observer (LESO) is utilized to optimize E-booster's dynamic performance. Specifically, the tracking differentiator (TD) and LESO are used to improve the dynamic precision and reduce the hysteresis effect. The overshoot is suppressed by TD, and the disturbance caused by nonlinear uncertainty is restrained by LESO. The experimental results show that RGCC sacrifices a 6% phase lag in the low-frequency domain for a 10% and 40% reduction in first and second-order, respectively, compared with the proportion integration differentiation (PID). Results demonstrate that RGCC has higher precision and stronger robustness in dynamic behavior.
publisherThe American Society of Mechanical Engineers (ASME)
titlePrecise Position Adjustment of Automotive Electrohydraulic Coupling System With Parameter Perturbations
typeJournal Paper
journal volume144
journal issue5
journal titleJournal of Dynamic Systems, Measurement, and Control
identifier doi10.1115/1.4053430
journal fristpage51008-1
journal lastpage51008-10
page10
treeJournal of Dynamic Systems, Measurement, and Control:;2022:;volume( 144 ):;issue: 005
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record