YaBeSH Engineering and Technology Library

    • Journals
    • PaperQuest
    • YSE Standards
    • YaBeSH
    • Login
    View Item 
    •   YE&T Library
    • ASCE
    • Journal of Aerospace Engineering
    • View Item
    •   YE&T Library
    • ASCE
    • Journal of Aerospace Engineering
    • View Item
    • All Fields
    • Source Title
    • Year
    • Publisher
    • Title
    • Subject
    • Author
    • DOI
    • ISBN
    Advanced Search
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Archive

    Rate-Dependent Fracture Behavior of Aerospace Epoxies: PR-520 and 3502

    Source: Journal of Aerospace Engineering:;2021:;Volume ( 035 ):;issue: 001::page 04021100
    Author:
    Emily Pittman
    ,
    Stylianos Koumlis
    ,
    Htet Naing Aung
    ,
    Amanda Bellafatto
    ,
    Leslie Lamberson
    DOI: 10.1061/(ASCE)AS.1943-5525.0001354
    Publisher: ASCE
    Abstract: To understand the response of polymeric materials used in fiber-reinforced composite structures, it is necessary to examine their brittle failure mechanisms under various loading scenarios. As such, this study presents the quasi-static and dynamic fracture response of aerospace resins 3502 and PR-520. Quasi-static fracture investigations were performed on precracked samples using single edge notch tension (SENT) configuration in a standard load frame. Dynamic fracture investigations were conducted using a unique long bar device where a projectile impacts the sample to generate wave-driven Mode-I (opening) fracture. Digital image correlation (DIC) is used in conjunction with ultrahigh-speed imaging to extract the stress intensity factor (SIF) at crack initiation using the stationary crack solution. Both material systems exhibited rate-dependent fracture behavior. For 3502, the average quasi-static fracture toughness was 0.60  MPam, 56% lower than the average dynamic fracture toughness of 1.07  MPam. However the PR-520 samples exhibited the opposite behavior, demonstrating greater quasi-static fracture toughness averaging 1.60  MPam with dynamic values of 0.71  MPam. The difference in behavior between the resins may be attributed to polymer chain crosslinking, where the lower degree of crosslinking in PR-520 enables increased elastic deformation and resistance to fracture under quasi-static loading, and the higher degree of crosslinking in 3502 gives rise to an increased resistance to fracture under dynamic loading.
    • Download: (1.674Mb)
    • Show Full MetaData Hide Full MetaData
    • Get RIS
    • Item Order
    • Go To Publisher
    • Statistics

      Rate-Dependent Fracture Behavior of Aerospace Epoxies: PR-520 and 3502

    URI
    https://yetl.yabesh.ir/yetl1/handle/yetl/4283058
    Collections
    • Journal of Aerospace Engineering

    Show full item record

    contributor authorEmily Pittman
    contributor authorStylianos Koumlis
    contributor authorHtet Naing Aung
    contributor authorAmanda Bellafatto
    contributor authorLeslie Lamberson
    date accessioned2022-05-07T20:54:19Z
    date available2022-05-07T20:54:19Z
    date issued2021-09-16
    identifier other(ASCE)AS.1943-5525.0001354.pdf
    identifier urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4283058
    description abstractTo understand the response of polymeric materials used in fiber-reinforced composite structures, it is necessary to examine their brittle failure mechanisms under various loading scenarios. As such, this study presents the quasi-static and dynamic fracture response of aerospace resins 3502 and PR-520. Quasi-static fracture investigations were performed on precracked samples using single edge notch tension (SENT) configuration in a standard load frame. Dynamic fracture investigations were conducted using a unique long bar device where a projectile impacts the sample to generate wave-driven Mode-I (opening) fracture. Digital image correlation (DIC) is used in conjunction with ultrahigh-speed imaging to extract the stress intensity factor (SIF) at crack initiation using the stationary crack solution. Both material systems exhibited rate-dependent fracture behavior. For 3502, the average quasi-static fracture toughness was 0.60  MPam, 56% lower than the average dynamic fracture toughness of 1.07  MPam. However the PR-520 samples exhibited the opposite behavior, demonstrating greater quasi-static fracture toughness averaging 1.60  MPam with dynamic values of 0.71  MPam. The difference in behavior between the resins may be attributed to polymer chain crosslinking, where the lower degree of crosslinking in PR-520 enables increased elastic deformation and resistance to fracture under quasi-static loading, and the higher degree of crosslinking in 3502 gives rise to an increased resistance to fracture under dynamic loading.
    publisherASCE
    titleRate-Dependent Fracture Behavior of Aerospace Epoxies: PR-520 and 3502
    typeJournal Paper
    journal volume35
    journal issue1
    journal titleJournal of Aerospace Engineering
    identifier doi10.1061/(ASCE)AS.1943-5525.0001354
    journal fristpage04021100
    journal lastpage04021100-10
    page10
    treeJournal of Aerospace Engineering:;2021:;Volume ( 035 ):;issue: 001
    contenttypeFulltext
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian
     
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian