Numerical Simulation of Airborne Salt Particle Behavior in Dry Gauze Method Using Porous Media ModelSource: Journal of Applied Mechanics:;2021:;volume( 088 ):;issue: 010::page 0101001-1DOI: 10.1115/1.4051114Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Airborne salt accelerates the corrosion of steel materials and, thus, must be quantitatively evaluated for the management of steel structures. In Japan, the dry gauze method, which uses a gauze embedded in a wooden frame, is often used to evaluate the amount of airborne salt. However, its collection efficiency for salt particles has not been verified owing to the complex airflows around the device. Therefore, as a first step to clarify the collection efficiency, the authors simulated the flow field around the collection device using computational fluid dynamics (CFD). In this study, the gauze was modeled as a porous medium to reduce the computational costs. Wind tunnel tests were performed to obtain the pressure loss coefficients of the gauze, which is necessary for the porous media method. Subsequently, particle tracking was performed in the calculated flow field, and the collection efficiency was evaluated under the condition of a filtration efficiency of 100%. The flow fields around the device were accurately reproduced using the porous media model, which considered both the tangential and normal resistances of the gauze. This result suggests that the tangential resistance must be considered in the porous media model when the porosity of an object is small, even if the thickness is small. The dependence of collection efficiency on wind speed and direction was quantitatively evaluated. The results showed that the collection efficiency was greatly affected by the complicated flow field around the device due to the combination of the gauze and wooden frame.
|
Collections
Show full item record
| contributor author | Tsubokura, Yuta | |
| contributor author | Noguchi, Kyohei | |
| contributor author | Yagi, Tomomi | |
| date accessioned | 2022-02-06T05:35:40Z | |
| date available | 2022-02-06T05:35:40Z | |
| date copyright | 5/24/2021 12:00:00 AM | |
| date issued | 2021 | |
| identifier issn | 0021-8936 | |
| identifier other | jam_88_10_101001.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl1/handle/yetl/4278355 | |
| description abstract | Airborne salt accelerates the corrosion of steel materials and, thus, must be quantitatively evaluated for the management of steel structures. In Japan, the dry gauze method, which uses a gauze embedded in a wooden frame, is often used to evaluate the amount of airborne salt. However, its collection efficiency for salt particles has not been verified owing to the complex airflows around the device. Therefore, as a first step to clarify the collection efficiency, the authors simulated the flow field around the collection device using computational fluid dynamics (CFD). In this study, the gauze was modeled as a porous medium to reduce the computational costs. Wind tunnel tests were performed to obtain the pressure loss coefficients of the gauze, which is necessary for the porous media method. Subsequently, particle tracking was performed in the calculated flow field, and the collection efficiency was evaluated under the condition of a filtration efficiency of 100%. The flow fields around the device were accurately reproduced using the porous media model, which considered both the tangential and normal resistances of the gauze. This result suggests that the tangential resistance must be considered in the porous media model when the porosity of an object is small, even if the thickness is small. The dependence of collection efficiency on wind speed and direction was quantitatively evaluated. The results showed that the collection efficiency was greatly affected by the complicated flow field around the device due to the combination of the gauze and wooden frame. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | Numerical Simulation of Airborne Salt Particle Behavior in Dry Gauze Method Using Porous Media Model | |
| type | Journal Paper | |
| journal volume | 88 | |
| journal issue | 10 | |
| journal title | Journal of Applied Mechanics | |
| identifier doi | 10.1115/1.4051114 | |
| journal fristpage | 0101001-1 | |
| journal lastpage | 0101001-13 | |
| page | 13 | |
| tree | Journal of Applied Mechanics:;2021:;volume( 088 ):;issue: 010 | |
| contenttype | Fulltext |