Ultra-High Strain Rate Constitutive Modeling of Pure Titanium Using Particle Impact TestSource: Journal of Applied Mechanics:;2020:;volume( 087 ):;issue: 009::page 091007-1DOI: 10.1115/1.4047290Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: With the advent of advanced testing techniques such as laser-induced particle impact test, it is possible to study materials mechanics under extremely high deformation rates, i.e., above 106 s−1, a relatively less explored regime of strain rates. Inspired by the classical Taylor impact test, in this study, we accelerate microparticles of commercially pure titanium to a range of impact velocities, from 144 to 428 m/s, toward a rigid substrate and record their deformation upon impact in real-time. We also conduct finite element modeling of the experimentally recorded impacts using two constitutive equations, namely, Johnson–Cook and Zerilli–Armstrong. We show that the titanium microparticles experience strain rates in the range of 106–1010 s−1 upon impact. We evaluate the capability of the Johnson–Cook and Zerilli–Armstrong equations in predicting the deformation response of pure Ti at ultra-high strain rates. With an optimization-based constitutive modeling approach, we also propose updated strain rate-related parameters for both equations and improve the extent to which the two models can describe the deformation of pure titanium at ultra-high strain rates.
|
Collections
Show full item record
| contributor author | Wang, Xuchen | |
| contributor author | Hassani, Mostafa | |
| date accessioned | 2022-02-04T22:06:43Z | |
| date available | 2022-02-04T22:06:43Z | |
| date copyright | 6/9/2020 12:00:00 AM | |
| date issued | 2020 | |
| identifier issn | 0021-8936 | |
| identifier other | jam_87_9_091007.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl1/handle/yetl/4274893 | |
| description abstract | With the advent of advanced testing techniques such as laser-induced particle impact test, it is possible to study materials mechanics under extremely high deformation rates, i.e., above 106 s−1, a relatively less explored regime of strain rates. Inspired by the classical Taylor impact test, in this study, we accelerate microparticles of commercially pure titanium to a range of impact velocities, from 144 to 428 m/s, toward a rigid substrate and record their deformation upon impact in real-time. We also conduct finite element modeling of the experimentally recorded impacts using two constitutive equations, namely, Johnson–Cook and Zerilli–Armstrong. We show that the titanium microparticles experience strain rates in the range of 106–1010 s−1 upon impact. We evaluate the capability of the Johnson–Cook and Zerilli–Armstrong equations in predicting the deformation response of pure Ti at ultra-high strain rates. With an optimization-based constitutive modeling approach, we also propose updated strain rate-related parameters for both equations and improve the extent to which the two models can describe the deformation of pure titanium at ultra-high strain rates. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | Ultra-High Strain Rate Constitutive Modeling of Pure Titanium Using Particle Impact Test | |
| type | Journal Paper | |
| journal volume | 87 | |
| journal issue | 9 | |
| journal title | Journal of Applied Mechanics | |
| identifier doi | 10.1115/1.4047290 | |
| journal fristpage | 091007-1 | |
| journal lastpage | 091007-11 | |
| page | 11 | |
| tree | Journal of Applied Mechanics:;2020:;volume( 087 ):;issue: 009 | |
| contenttype | Fulltext |