YaBeSH Engineering and Technology Library

    • Journals
    • PaperQuest
    • YSE Standards
    • YaBeSH
    • Login
    View Item 
    •   YE&T Library
    • ASCE
    • Journal of Aerospace Engineering
    • View Item
    •   YE&T Library
    • ASCE
    • Journal of Aerospace Engineering
    • View Item
    • All Fields
    • Source Title
    • Year
    • Publisher
    • Title
    • Subject
    • Author
    • DOI
    • ISBN
    Advanced Search
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Archive

    Additively Manufactured Sound-Absorbing Porous Structures for Airfoil Trailing-Edge Noise Control

    Source: Journal of Aerospace Engineering:;2021:;Volume ( 034 ):;issue: 005::page 04021068-1
    Author:
    Chaoyang Jiang
    ,
    Danielle Moreau
    ,
    Jeoffrey Fischer
    ,
    Con Doolan
    DOI: 10.1061/(ASCE)AS.1943-5525.0001317
    Publisher: ASCE
    Abstract: This paper presents the results of experimental investigations on the sound absorption of two porous structures and the far-field noise performance of an airfoil employing sound-absorbing porous structures at the trailing edge. The porous structure consists of a microperforated housing with an air gap (PA structure) or an acoustic foam insert (PF structure). Sound absorption coefficients have been characterized using an impedance tube. Compared with a commercial acoustic foam, PF structures have shown a consistently higher (up to 0.5 higher) sound absorption coefficient over 0.5–6.4 kHz. Moreover, the frequency characteristics of PA and PF structures are predictable, which allows their geometric optimization to suit different applications. Far-field noise of airfoils has been measured using a 64-channel microphone array at various flow conditions. The sound-absorbing microtube structure is found to reduce the trailing-edge (TE) noise by up to approximately 12 dB at lower frequencies (1.5–6 kHz), while increasing high-frequency (over 6 kHz) noise levels due to the roughness elements of porous geometries and unsteady flow permeation. The peak frequency of noise reductions is found to not scale with the flow speed, but remains within a narrow frequency band at different flow conditions (U∞=30−50  m/s, αg=0°−10°). This is consistent with the narrow-band feature of microtube structures’ sound absorption, which indicates the contribution of sound absorption to TE noise reduction. The PF structure, due to its broadband sound absorption and tunable frequency characteristics, is considered a promising device for trailing-edge noise control.
    • Download: (1.870Mb)
    • Show Full MetaData Hide Full MetaData
    • Get RIS
    • Item Order
    • Go To Publisher
    • Statistics

      Additively Manufactured Sound-Absorbing Porous Structures for Airfoil Trailing-Edge Noise Control

    URI
    https://yetl.yabesh.ir/yetl1/handle/yetl/4272171
    Collections
    • Journal of Aerospace Engineering

    Show full item record

    contributor authorChaoyang Jiang
    contributor authorDanielle Moreau
    contributor authorJeoffrey Fischer
    contributor authorCon Doolan
    date accessioned2022-02-01T21:51:25Z
    date available2022-02-01T21:51:25Z
    date issued9/1/2021
    identifier other%28ASCE%29AS.1943-5525.0001317.pdf
    identifier urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4272171
    description abstractThis paper presents the results of experimental investigations on the sound absorption of two porous structures and the far-field noise performance of an airfoil employing sound-absorbing porous structures at the trailing edge. The porous structure consists of a microperforated housing with an air gap (PA structure) or an acoustic foam insert (PF structure). Sound absorption coefficients have been characterized using an impedance tube. Compared with a commercial acoustic foam, PF structures have shown a consistently higher (up to 0.5 higher) sound absorption coefficient over 0.5–6.4 kHz. Moreover, the frequency characteristics of PA and PF structures are predictable, which allows their geometric optimization to suit different applications. Far-field noise of airfoils has been measured using a 64-channel microphone array at various flow conditions. The sound-absorbing microtube structure is found to reduce the trailing-edge (TE) noise by up to approximately 12 dB at lower frequencies (1.5–6 kHz), while increasing high-frequency (over 6 kHz) noise levels due to the roughness elements of porous geometries and unsteady flow permeation. The peak frequency of noise reductions is found to not scale with the flow speed, but remains within a narrow frequency band at different flow conditions (U∞=30−50  m/s, αg=0°−10°). This is consistent with the narrow-band feature of microtube structures’ sound absorption, which indicates the contribution of sound absorption to TE noise reduction. The PF structure, due to its broadband sound absorption and tunable frequency characteristics, is considered a promising device for trailing-edge noise control.
    publisherASCE
    titleAdditively Manufactured Sound-Absorbing Porous Structures for Airfoil Trailing-Edge Noise Control
    typeJournal Paper
    journal volume34
    journal issue5
    journal titleJournal of Aerospace Engineering
    identifier doi10.1061/(ASCE)AS.1943-5525.0001317
    journal fristpage04021068-1
    journal lastpage04021068-11
    page11
    treeJournal of Aerospace Engineering:;2021:;Volume ( 034 ):;issue: 005
    contenttypeFulltext
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian
     
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian