YaBeSH Engineering and Technology Library

    • Journals
    • PaperQuest
    • YSE Standards
    • YaBeSH
    • Login
    View Item 
    •   YE&T Library
    • ASCE
    • Journal of Aerospace Engineering
    • View Item
    •   YE&T Library
    • ASCE
    • Journal of Aerospace Engineering
    • View Item
    • All Fields
    • Source Title
    • Year
    • Publisher
    • Title
    • Subject
    • Author
    • DOI
    • ISBN
    Advanced Search
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Archive

    Microvortex Generator Controlled Shock–Boundary Layer Interactions in Hypersonic Intake

    Source: Journal of Aerospace Engineering:;2021:;Volume ( 034 ):;issue: 002::page 04020120-1
    Author:
    Tamal Jana
    ,
    Thillaikumar T.
    ,
    Mrinal Kaushik
    DOI: 10.1061/(ASCE)AS.1943-5525.0001239
    Publisher: ASCE
    Abstract: The occurrence of shock and boundary layer interactions (SBLIs) in aircraft-engine intakes often results in poor total pressure recovery, a degraded boundary layer, and, in worst cases, flow separation. Hence, the SBLIs must be controlled to reduce/eliminate the losses. In this study, the efficacy of conventional microvortex generators (MVGs), deployed before and at the interaction region of a Mach 5.7 mixed-compression intake, has been investigated experimentally. Specifically, an array of MVGs, placed in the spanwise direction, was found to be useful in reducing the extent of the interactions. The height of the MVGs was varied as 0.5, 0.7, and 1 mm. Both quantitative and qualitative investigations have been carried out by measuring the static pressure distribution over the surface of the ramp and visualizing the SBLI phenomena at various time instants during the test run using the time-resolved Schlieren technique. The MVGs with a height of 1.0 mm, deployed at the interaction region, appeared to be quite effective in reducing the wall static pressure, with a maximum of a 13.57% reduction at the downstream proximal location. In addition, the Schlieren images show a decrease in the separation bubble size in all the intakes controlled with MVGs; a maximum reduction of 31.25% in the bubble length is achieved with 0.7 mm MVGs, which is deployed upstream of the interaction point.
    • Download: (7.454Mb)
    • Show Full MetaData Hide Full MetaData
    • Get RIS
    • Item Order
    • Go To Publisher
    • Statistics

      Microvortex Generator Controlled Shock–Boundary Layer Interactions in Hypersonic Intake

    URI
    https://yetl.yabesh.ir/yetl1/handle/yetl/4271193
    Collections
    • Journal of Aerospace Engineering

    Show full item record

    contributor authorTamal Jana
    contributor authorThillaikumar T.
    contributor authorMrinal Kaushik
    date accessioned2022-02-01T00:16:40Z
    date available2022-02-01T00:16:40Z
    date issued3/1/2021
    identifier other%28ASCE%29AS.1943-5525.0001239.pdf
    identifier urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4271193
    description abstractThe occurrence of shock and boundary layer interactions (SBLIs) in aircraft-engine intakes often results in poor total pressure recovery, a degraded boundary layer, and, in worst cases, flow separation. Hence, the SBLIs must be controlled to reduce/eliminate the losses. In this study, the efficacy of conventional microvortex generators (MVGs), deployed before and at the interaction region of a Mach 5.7 mixed-compression intake, has been investigated experimentally. Specifically, an array of MVGs, placed in the spanwise direction, was found to be useful in reducing the extent of the interactions. The height of the MVGs was varied as 0.5, 0.7, and 1 mm. Both quantitative and qualitative investigations have been carried out by measuring the static pressure distribution over the surface of the ramp and visualizing the SBLI phenomena at various time instants during the test run using the time-resolved Schlieren technique. The MVGs with a height of 1.0 mm, deployed at the interaction region, appeared to be quite effective in reducing the wall static pressure, with a maximum of a 13.57% reduction at the downstream proximal location. In addition, the Schlieren images show a decrease in the separation bubble size in all the intakes controlled with MVGs; a maximum reduction of 31.25% in the bubble length is achieved with 0.7 mm MVGs, which is deployed upstream of the interaction point.
    publisherASCE
    titleMicrovortex Generator Controlled Shock–Boundary Layer Interactions in Hypersonic Intake
    typeJournal Paper
    journal volume34
    journal issue2
    journal titleJournal of Aerospace Engineering
    identifier doi10.1061/(ASCE)AS.1943-5525.0001239
    journal fristpage04020120-1
    journal lastpage04020120-13
    page13
    treeJournal of Aerospace Engineering:;2021:;Volume ( 034 ):;issue: 002
    contenttypeFulltext
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian
     
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian