Assessment of Residual Performances of Al–CFRP Cocured Hybrid Samples Subjected to Galvanic CorrosionSource: Journal of Aerospace Engineering:;2019:;Volume ( 032 ):;issue: 005Author:Sébastien Mercier
,
Romain Agogué
,
Patrick Lapeyronnie
,
Anne Mavel
,
Philippe Nunez
,
Céline Le Sinq
DOI: 10.1061/(ASCE)AS.1943-5525.0001036Publisher: American Society of Civil Engineers
Abstract: Tartaric sulfuric anodizing (TSA) and γ-glycidoxypropyltrimethoxysilane silanization (γ-GPS) were tested as treatments of Al-2024 and Al-2198 aluminum (Al) alloys for promoting adherence and corrosion protection of the Al–carbon fiber-reinforced plastics (Al–CFRPs) interface in Al–CFRP cocured hybrid materials, and compared with chromic acid anodizing (CAA). The corrosion resistance and the durability of the Al–CFRP interface were investigated and discussed. Polarization curves and Evans diagrams were achieved in NaCl solution, and the adhesion and durability of the interface were evaluated by mechanical tensile test on single-lap joint specimens before and after salt-spray exposure. The results are discussed and compared with CAA to evaluate the proposed treatments as CAA substitution candidate in the REACH European regulation (Registration, Evaluation, Authorization and Restriction of Chemicals). It was found that TSA and γ-GPS can provide as good adhesion as CAA before salt-spray exposure, but a higher mechanical strength depletion of the interface is obtained after long-term salt-spray exposure compared with CAA. This depletion was attributed to an insufficient long-term corrosion resistance of TSA or γ-GPS compared with CAA.
|
Collections
Show full item record
| contributor author | Sébastien Mercier | |
| contributor author | Romain Agogué | |
| contributor author | Patrick Lapeyronnie | |
| contributor author | Anne Mavel | |
| contributor author | Philippe Nunez | |
| contributor author | Céline Le Sinq | |
| date accessioned | 2019-09-18T10:36:47Z | |
| date available | 2019-09-18T10:36:47Z | |
| date issued | 2019 | |
| identifier other | %28ASCE%29AS.1943-5525.0001036.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl1/handle/yetl/4259391 | |
| description abstract | Tartaric sulfuric anodizing (TSA) and γ-glycidoxypropyltrimethoxysilane silanization (γ-GPS) were tested as treatments of Al-2024 and Al-2198 aluminum (Al) alloys for promoting adherence and corrosion protection of the Al–carbon fiber-reinforced plastics (Al–CFRPs) interface in Al–CFRP cocured hybrid materials, and compared with chromic acid anodizing (CAA). The corrosion resistance and the durability of the Al–CFRP interface were investigated and discussed. Polarization curves and Evans diagrams were achieved in NaCl solution, and the adhesion and durability of the interface were evaluated by mechanical tensile test on single-lap joint specimens before and after salt-spray exposure. The results are discussed and compared with CAA to evaluate the proposed treatments as CAA substitution candidate in the REACH European regulation (Registration, Evaluation, Authorization and Restriction of Chemicals). It was found that TSA and γ-GPS can provide as good adhesion as CAA before salt-spray exposure, but a higher mechanical strength depletion of the interface is obtained after long-term salt-spray exposure compared with CAA. This depletion was attributed to an insufficient long-term corrosion resistance of TSA or γ-GPS compared with CAA. | |
| publisher | American Society of Civil Engineers | |
| title | Assessment of Residual Performances of Al–CFRP Cocured Hybrid Samples Subjected to Galvanic Corrosion | |
| type | Journal Paper | |
| journal volume | 32 | |
| journal issue | 5 | |
| journal title | Journal of Aerospace Engineering | |
| identifier doi | 10.1061/(ASCE)AS.1943-5525.0001036 | |
| page | 04019057 | |
| tree | Journal of Aerospace Engineering:;2019:;Volume ( 032 ):;issue: 005 | |
| contenttype | Fulltext |