YaBeSH Engineering and Technology Library

    • Journals
    • PaperQuest
    • YSE Standards
    • YaBeSH
    • Login
    View Item 
    •   YE&T Library
    • ASME
    • Journal of Applied Mechanics
    • View Item
    •   YE&T Library
    • ASME
    • Journal of Applied Mechanics
    • View Item
    • All Fields
    • Source Title
    • Year
    • Publisher
    • Title
    • Subject
    • Author
    • DOI
    • ISBN
    Advanced Search
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Archive

    Fretting Wear Modeling of Cylindrical Line Contact in Plane-Strain Borne by the Finite Element Method

    Source: Journal of Applied Mechanics:;2019:;volume( 086 ):;issue: 006::page 61012
    Author:
    Yang, Huaidong
    ,
    Green, Itzhak
    DOI: 10.1115/1.4043074
    Publisher: American Society of Mechanical Engineers (ASME)
    Abstract: This is the first study to develop an empirical formulation to predict fretting wear (volume removal) under frictional conditions for plane-strain line contacts as borne out by the finite element analysis (FEA). The contact is between a deformable half-cylinder rubbing against a deformable flat block. The FEA is guided by detailed physical conceptions, with results that subsequently lead to the methodical modeling of fretting wear. The materials in contact are first set to steel/steel, then to Alloy617/Alloy617, and finally to copper/copper. Various coefficients of friction (COFs) and the Archard Wear Model are applied to the interface. Initially, pure elastic conditions are investigated. The theoretical predictions for the wear volume at the end of the partial slip condition in unidirectional sliding contact agree very well with the FEA results. The empirical formulation for the initial gross slip distance is constructed, again revealing results that are in good agreement with those obtained from the FEA for different materials and for various scales. The Timoshenko beam theory and the tangential loading analysis of a half elastic space are used to approximate the deflection of the half-cylinder and the flat block, respectively. That theory supports well the empirical formulation, matching closely the corresponding FEA results. The empirical formulation of the wear volume for a general cycle under fretting motion is then established. The results are shown to be valid for different materials and various COFs when compared with the FEA results. Finally, plasticity is introduced to the model, shown to cause two phenomena, namely junction growth and larger tangential deformations. Wear is shown to either increase or decrease depending on the combined influences of these two phenomena.
    • Download: (1.433Mb)
    • Show Full MetaData Hide Full MetaData
    • Get RIS
    • Item Order
    • Go To Publisher
    • Statistics

      Fretting Wear Modeling of Cylindrical Line Contact in Plane-Strain Borne by the Finite Element Method

    URI
    https://yetl.yabesh.ir/yetl1/handle/yetl/4258911
    Collections
    • Journal of Applied Mechanics

    Show full item record

    contributor authorYang, Huaidong
    contributor authorGreen, Itzhak
    date accessioned2019-09-18T09:06:20Z
    date available2019-09-18T09:06:20Z
    date copyright4/12/2019 12:00:00 AM
    date issued2019
    identifier issn0021-8936
    identifier otherjam_86_6_061012
    identifier urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4258911
    description abstractThis is the first study to develop an empirical formulation to predict fretting wear (volume removal) under frictional conditions for plane-strain line contacts as borne out by the finite element analysis (FEA). The contact is between a deformable half-cylinder rubbing against a deformable flat block. The FEA is guided by detailed physical conceptions, with results that subsequently lead to the methodical modeling of fretting wear. The materials in contact are first set to steel/steel, then to Alloy617/Alloy617, and finally to copper/copper. Various coefficients of friction (COFs) and the Archard Wear Model are applied to the interface. Initially, pure elastic conditions are investigated. The theoretical predictions for the wear volume at the end of the partial slip condition in unidirectional sliding contact agree very well with the FEA results. The empirical formulation for the initial gross slip distance is constructed, again revealing results that are in good agreement with those obtained from the FEA for different materials and for various scales. The Timoshenko beam theory and the tangential loading analysis of a half elastic space are used to approximate the deflection of the half-cylinder and the flat block, respectively. That theory supports well the empirical formulation, matching closely the corresponding FEA results. The empirical formulation of the wear volume for a general cycle under fretting motion is then established. The results are shown to be valid for different materials and various COFs when compared with the FEA results. Finally, plasticity is introduced to the model, shown to cause two phenomena, namely junction growth and larger tangential deformations. Wear is shown to either increase or decrease depending on the combined influences of these two phenomena.
    publisherAmerican Society of Mechanical Engineers (ASME)
    titleFretting Wear Modeling of Cylindrical Line Contact in Plane-Strain Borne by the Finite Element Method
    typeJournal Paper
    journal volume86
    journal issue6
    journal titleJournal of Applied Mechanics
    identifier doi10.1115/1.4043074
    journal fristpage61012
    journal lastpage061012-12
    treeJournal of Applied Mechanics:;2019:;volume( 086 ):;issue: 006
    contenttypeFulltext
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian
     
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian