YaBeSH Engineering and Technology Library

    • Journals
    • PaperQuest
    • YSE Standards
    • YaBeSH
    • Login
    View Item 
    •   YE&T Library
    • ASME
    • Journal of Applied Mechanics
    • View Item
    •   YE&T Library
    • ASME
    • Journal of Applied Mechanics
    • View Item
    • All Fields
    • Source Title
    • Year
    • Publisher
    • Title
    • Subject
    • Author
    • DOI
    • ISBN
    Advanced Search
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Archive

    Adhesive Joint Model for Delamination Analysis of a Co-Cured Composite Joint: Applicability and Limitation

    Source: Journal of Applied Mechanics:;2019:;volume( 086 ):;issue: 005::page 51006
    Author:
    Duong, C. N.
    DOI: 10.1115/1.4042893
    Publisher: American Society of Mechanical Engineers (ASME)
    Abstract: Modeling the interface between two adherents in a co-cured composite joint for a delamination analysis is always a challenge since properties and thickness of the material forming the interface are not clearly defined or well characterized. In a conventional finite element (FE) analysis using virtual crack closure technique (VCCT) based on a linear elastic fracture mechanics (LEFM) theory, adherents are assigned to share the same common nodes along their intact interface. On the other hand, an FE analysis using cohesive elements or analytical methods based on an adhesive joint model for a delamination analysis of a co-cured joint will require modeling of the interface as well as the appropriate selection of its thickness and properties. The purpose of this paper is to establish the applicability and limitation of the adhesive joint model for a delamination analysis of a co-cured composite joint. In particular, it will show that when certain requirements are met, the strain energy release rates (SERR) become independent or nearly independent of the adhesive stiffness and thickness, and thus, SERR of an adhesive joint will be the same as that for a co-cured joint. These requirements are determined from a theoretical consideration, and they can be expressed explicitly in terms of joint characteristic (or load transfer) lengths and joint physical lengths. The established requirements are further validated by numerical results for various cracked joint geometries. Finally, implication of a mode ratio obtained by the proposed adhesive joint model for a corresponding delamination crack is discussed.
    • Download: (405.5Kb)
    • Show Full MetaData Hide Full MetaData
    • Get RIS
    • Item Order
    • Go To Publisher
    • Statistics

      Adhesive Joint Model for Delamination Analysis of a Co-Cured Composite Joint: Applicability and Limitation

    URI
    https://yetl.yabesh.ir/yetl1/handle/yetl/4258513
    Collections
    • Journal of Applied Mechanics

    Show full item record

    contributor authorDuong, C. N.
    date accessioned2019-09-18T09:04:19Z
    date available2019-09-18T09:04:19Z
    date copyright3/5/2019 12:00:00 AM
    date issued2019
    identifier issn0021-8936
    identifier otherjam_86_5_051006.pdf
    identifier urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4258513
    description abstractModeling the interface between two adherents in a co-cured composite joint for a delamination analysis is always a challenge since properties and thickness of the material forming the interface are not clearly defined or well characterized. In a conventional finite element (FE) analysis using virtual crack closure technique (VCCT) based on a linear elastic fracture mechanics (LEFM) theory, adherents are assigned to share the same common nodes along their intact interface. On the other hand, an FE analysis using cohesive elements or analytical methods based on an adhesive joint model for a delamination analysis of a co-cured joint will require modeling of the interface as well as the appropriate selection of its thickness and properties. The purpose of this paper is to establish the applicability and limitation of the adhesive joint model for a delamination analysis of a co-cured composite joint. In particular, it will show that when certain requirements are met, the strain energy release rates (SERR) become independent or nearly independent of the adhesive stiffness and thickness, and thus, SERR of an adhesive joint will be the same as that for a co-cured joint. These requirements are determined from a theoretical consideration, and they can be expressed explicitly in terms of joint characteristic (or load transfer) lengths and joint physical lengths. The established requirements are further validated by numerical results for various cracked joint geometries. Finally, implication of a mode ratio obtained by the proposed adhesive joint model for a corresponding delamination crack is discussed.
    publisherAmerican Society of Mechanical Engineers (ASME)
    titleAdhesive Joint Model for Delamination Analysis of a Co-Cured Composite Joint: Applicability and Limitation
    typeJournal Paper
    journal volume86
    journal issue5
    journal titleJournal of Applied Mechanics
    identifier doi10.1115/1.4042893
    journal fristpage51006
    journal lastpage051006-11
    treeJournal of Applied Mechanics:;2019:;volume( 086 ):;issue: 005
    contenttypeFulltext
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian
     
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian