Strakes Effects on Asymmetric Flow Over a Blunt-Nosed Slender Body at a High Angle of AttackSource: Journal of Fluids Engineering:;2019:;volume( 141 ):;issue: 006::page 61103DOI: 10.1115/1.4041815Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: In general speaking, the missiles execute flight at high angles of attack in order to enhance their maneuverability. However, the inevitable side-force, which is caused by the asymmetric flow over these kinds of traditional slender body configurations with blunt nose at a high attack angle, induces the yawing or rolling deviation and the missiles will lose their predicted trajectory consequently. This study examines and diminishes the side-force induced by the inevitable asymmetric flow around this traditional slender body configuration with blunt nose at a high angle of attack (AoA = 50 deg). On one hand, the flow over a fixed blunt-nosed slender body model with strakes mounted at an axial position of x/D = 1.6–2.7 is investigated experimentally at α = 50 deg (D is the diameter of the model). On the other hand, the wingspan of the strakes is varied to investigate its effect on the leeward flow over the model. The Reynolds number is set at ReD = 1.54 × 105 based on D and incoming upstream velocity. The results verify that the formation of asymmetric vortices is hindered by the existence of strakes, and the strake-induced vortices develop symmetrically and contribute to the reduction in side-force of the model. In addition, the increase in strake wingspan reduces asymmetric characteristics of the vortex around the model and causes a significant decrease in side-force in each section measured. The strake with the 0.1D wingspan can reduce the sectional side-force to 25% of that in the condition without strakes.
|
Collections
Show full item record
| contributor author | Yuan, Qihang | |
| contributor author | Wang, Yankui | |
| contributor author | Qi, Zhongyang | |
| date accessioned | 2019-03-17T11:02:44Z | |
| date available | 2019-03-17T11:02:44Z | |
| date copyright | 12/10/2018 12:00:00 AM | |
| date issued | 2019 | |
| identifier issn | 0098-2202 | |
| identifier other | fe_141_06_061103.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl1/handle/yetl/4256574 | |
| description abstract | In general speaking, the missiles execute flight at high angles of attack in order to enhance their maneuverability. However, the inevitable side-force, which is caused by the asymmetric flow over these kinds of traditional slender body configurations with blunt nose at a high attack angle, induces the yawing or rolling deviation and the missiles will lose their predicted trajectory consequently. This study examines and diminishes the side-force induced by the inevitable asymmetric flow around this traditional slender body configuration with blunt nose at a high angle of attack (AoA = 50 deg). On one hand, the flow over a fixed blunt-nosed slender body model with strakes mounted at an axial position of x/D = 1.6–2.7 is investigated experimentally at α = 50 deg (D is the diameter of the model). On the other hand, the wingspan of the strakes is varied to investigate its effect on the leeward flow over the model. The Reynolds number is set at ReD = 1.54 × 105 based on D and incoming upstream velocity. The results verify that the formation of asymmetric vortices is hindered by the existence of strakes, and the strake-induced vortices develop symmetrically and contribute to the reduction in side-force of the model. In addition, the increase in strake wingspan reduces asymmetric characteristics of the vortex around the model and causes a significant decrease in side-force in each section measured. The strake with the 0.1D wingspan can reduce the sectional side-force to 25% of that in the condition without strakes. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | Strakes Effects on Asymmetric Flow Over a Blunt-Nosed Slender Body at a High Angle of Attack | |
| type | Journal Paper | |
| journal volume | 141 | |
| journal issue | 6 | |
| journal title | Journal of Fluids Engineering | |
| identifier doi | 10.1115/1.4041815 | |
| journal fristpage | 61103 | |
| journal lastpage | 061103-12 | |
| tree | Journal of Fluids Engineering:;2019:;volume( 141 ):;issue: 006 | |
| contenttype | Fulltext |