YaBeSH Engineering and Technology Library

    • Journals
    • PaperQuest
    • YSE Standards
    • YaBeSH
    • Login
    View Item 
    •   YE&T Library
    • ASME
    • Journal of Tribology
    • View Item
    •   YE&T Library
    • ASME
    • Journal of Tribology
    • View Item
    • All Fields
    • Source Title
    • Year
    • Publisher
    • Title
    • Subject
    • Author
    • DOI
    • ISBN
    Advanced Search
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Archive

    High-Temperature Wear Mechanisms of a Severely Plastic Deformed Al/Mg2Si Composite

    Source: Journal of Tribology:;2019:;volume( 141 ):;issue: 003::page 31604
    Author:
    Ebrahimi, Mahsa
    ,
    Zarei-Hanzaki, Abbas
    ,
    Shafieizad, A. H.
    ,
    Šlapáková, Michaela
    ,
    Teymoory, Parya
    DOI: 10.1115/1.4041764
    Publisher: The American Society of Mechanical Engineers (ASME)
    Abstract: The present work was primarily conducted to study the wear behavior of as-received and severely deformed Al-15%Mg2Si in situ composites. The severe plastic deformation was applied using accumulative back extrusion (ABE) technique (one and three passes). The continuous dynamic recrystallization (CDRX) was recognized as the main strain accommodation and grain refinement mechanism within aluminum matrix during ABE cycles. To investigate the wear properties of the processed material, the dry sliding wear tests were carried out on both the as-received and processed samples under normal load of 10 and 20 N at room temperature, 100 °C, and 200 °C. The results indicated a better wear resistance of processed specimens in comparison to the as-received ones at room temperature. In addition, the wear performance was improved as the ABE pass numbers increased. These were related to the presence of oxide tribolayer. At 100 °C, the as-received material exhibited a better wear performance compared to the processed material; this was attributed to the formation of a work-hardened layer on the worn surface. At 200 °C, both the as-received and processed composites experienced a severe wear condition. In general, elevating the temperature changed the dominant wear mechanism from oxidation and delamination at room temperature to severe adhesion and plastic deformation at 200 °C.
    • Download: (7.001Mb)
    • Show Full MetaData Hide Full MetaData
    • Get RIS
    • Item Order
    • Go To Publisher
    • Statistics

      High-Temperature Wear Mechanisms of a Severely Plastic Deformed Al/Mg2Si Composite

    URI
    https://yetl.yabesh.ir/yetl1/handle/yetl/4256436
    Collections
    • Journal of Tribology

    Show full item record

    contributor authorEbrahimi, Mahsa
    contributor authorZarei-Hanzaki, Abbas
    contributor authorShafieizad, A. H.
    contributor authorŠlapáková, Michaela
    contributor authorTeymoory, Parya
    date accessioned2019-03-17T10:56:20Z
    date available2019-03-17T10:56:20Z
    date copyright11/21/2018 12:00:00 AM
    date issued2019
    identifier issn0742-4787
    identifier othertrib_141_03_031604.pdf
    identifier urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4256436
    description abstractThe present work was primarily conducted to study the wear behavior of as-received and severely deformed Al-15%Mg2Si in situ composites. The severe plastic deformation was applied using accumulative back extrusion (ABE) technique (one and three passes). The continuous dynamic recrystallization (CDRX) was recognized as the main strain accommodation and grain refinement mechanism within aluminum matrix during ABE cycles. To investigate the wear properties of the processed material, the dry sliding wear tests were carried out on both the as-received and processed samples under normal load of 10 and 20 N at room temperature, 100 °C, and 200 °C. The results indicated a better wear resistance of processed specimens in comparison to the as-received ones at room temperature. In addition, the wear performance was improved as the ABE pass numbers increased. These were related to the presence of oxide tribolayer. At 100 °C, the as-received material exhibited a better wear performance compared to the processed material; this was attributed to the formation of a work-hardened layer on the worn surface. At 200 °C, both the as-received and processed composites experienced a severe wear condition. In general, elevating the temperature changed the dominant wear mechanism from oxidation and delamination at room temperature to severe adhesion and plastic deformation at 200 °C.
    publisherThe American Society of Mechanical Engineers (ASME)
    titleHigh-Temperature Wear Mechanisms of a Severely Plastic Deformed Al/Mg2Si Composite
    typeJournal Paper
    journal volume141
    journal issue3
    journal titleJournal of Tribology
    identifier doi10.1115/1.4041764
    journal fristpage31604
    journal lastpage031604-14
    treeJournal of Tribology:;2019:;volume( 141 ):;issue: 003
    contenttypeFulltext
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian
     
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian