Nanoscratch Resistance and Nanotribological Performance of Ti/MoS2 Coating on Al-Si Alloy Deposited by Pulse Laser Deposition TechniqueSource: Journal of Tribology:;2019:;volume( 141 ):;issue: 002::page 22003DOI: 10.1115/1.4041366Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Ti/MoS2 coating was deposited by pulse laser deposition technology on Al-Si substrate. The microstructure, elemental analysis, nanotribological behavior of coating was investigated. The coating was composed of Ti, Mo, S, and O with typical diffraction peak around 2θ range from 30 deg to 70 deg. Nanoscratch with ramp loading was performed at low loads. The scratch test with ramp normal loading was analyzed for failure of coating in three ranges, viz., range A, range B, and range C. Scratch test result shows that the peeling of coating occurred at the normal load of 1327.75 μN and the lateral load of 75.96 μN. Nanowear with 2, 4, 6, 8, 10 number of cycles was performed at low load 100 μN. Nanowear results shows that wear rate decreases with increase in wear cycles, which attributed the self-lubricating property of Ti/MoS2 coating. Also, Ti/MoS2 coating display smooth wear path with no debris and cracks, which attributed plastic flow of coating around impression. Thus, mode of wear mechanism is mainly ductile and abrasive.
|
Collections
Show full item record
| contributor author | Banday, Summera | |
| contributor author | Wani, M. F. | |
| date accessioned | 2019-03-17T10:38:26Z | |
| date available | 2019-03-17T10:38:26Z | |
| date copyright | 10/24/2018 12:00:00 AM | |
| date issued | 2019 | |
| identifier issn | 0742-4787 | |
| identifier other | trib_141_02_022003.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl1/handle/yetl/4256235 | |
| description abstract | Ti/MoS2 coating was deposited by pulse laser deposition technology on Al-Si substrate. The microstructure, elemental analysis, nanotribological behavior of coating was investigated. The coating was composed of Ti, Mo, S, and O with typical diffraction peak around 2θ range from 30 deg to 70 deg. Nanoscratch with ramp loading was performed at low loads. The scratch test with ramp normal loading was analyzed for failure of coating in three ranges, viz., range A, range B, and range C. Scratch test result shows that the peeling of coating occurred at the normal load of 1327.75 μN and the lateral load of 75.96 μN. Nanowear with 2, 4, 6, 8, 10 number of cycles was performed at low load 100 μN. Nanowear results shows that wear rate decreases with increase in wear cycles, which attributed the self-lubricating property of Ti/MoS2 coating. Also, Ti/MoS2 coating display smooth wear path with no debris and cracks, which attributed plastic flow of coating around impression. Thus, mode of wear mechanism is mainly ductile and abrasive. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | Nanoscratch Resistance and Nanotribological Performance of Ti/MoS2 Coating on Al-Si Alloy Deposited by Pulse Laser Deposition Technique | |
| type | Journal Paper | |
| journal volume | 141 | |
| journal issue | 2 | |
| journal title | Journal of Tribology | |
| identifier doi | 10.1115/1.4041366 | |
| journal fristpage | 22003 | |
| journal lastpage | 022003-9 | |
| tree | Journal of Tribology:;2019:;volume( 141 ):;issue: 002 | |
| contenttype | Fulltext |