Modeling Machine Motion and Process Parameter Errors for Improving Dimensional Accuracy of Fused Deposition Modeling Machines

Abstract

The dimensional accuracy of fused deposition modeling (FDM) machines is dependent on errors caused by processing parameters and machine motions. In this study, an integrated error model combining these effects is developed. Extruder temperature, layer thickness, and infill density are selected as parameters of this study for three FDM machines, namely, Flashforge Finder, Ultimaker 2 go, and XYZ da Vinci 2.0 Duo. Experiments have been conducted using Taguchi method and the interactions between processing parameters are analyzed. Based on the dimensional deviations between fabricated parts and the computer aided design (CAD) geometry, a set of coefficients for the integrated error model are calculated to characterize each machine. Based on the results of the integrated error model, the original CAD geometry is optimized for fabrication accuracy on each machine. New parts are fabricated using the optimized CAD geometries. Through comparing the dimensional deviations of parts fabricated before and after optimization, the effectiveness of the integrated error model is analyzed and demonstrated for the three FDM machines.