YaBeSH Engineering and Technology Library

    • Journals
    • PaperQuest
    • YSE Standards
    • YaBeSH
    • Login
    View Item 
    •   YE&T Library
    • ASME
    • Journal of Engineering for Gas Turbines and Power
    • View Item
    •   YE&T Library
    • ASME
    • Journal of Engineering for Gas Turbines and Power
    • View Item
    • All Fields
    • Source Title
    • Year
    • Publisher
    • Title
    • Subject
    • Author
    • DOI
    • ISBN
    Advanced Search
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Archive

    Effects of Fuel Molecular Weight on Emissions in a Jet Flame and a Model Gas Turbine Combustor

    Source: Journal of Engineering for Gas Turbines and Power:;2018:;volume( 140 ):;issue: 003::page 31505
    Author:
    Makwana, Anandkumar
    ,
    Iyer, Suresh
    ,
    Linevsky, Milton
    ,
    Santoro, Robert
    ,
    Litzinger, Thomas
    ,
    O'Connor, Jacqueline
    DOI: 10.1115/1.4037928
    Publisher: The American Society of Mechanical Engineers (ASME)
    Abstract: The objective of this study is to understand the effects of fuel volatility on soot emissions. This effect is investigated in two experimental configurations: a jet flame and a model gas turbine combustor. The jet flame provides information about the effects of fuel on the spatial development of aromatics and soot in an axisymmetric, co-flow, laminar flame. The data from the model gas turbine combustor illustrate the effect of fuel volatility on net soot production under conditions similar to an actual engine at cruise. Two fuels with different boiling points are investigated: n-heptane/n-dodecane mixture and n-hexadecane/n-dodecane mixture. The jet flames are nonpremixed and rich premixed flames in order to have fuel conditions similar to those in the primary zone of an aircraft engine combustor. The results from the jet flames indicate that the peak soot volume fraction produced in the n-hexadecane fuel is slightly higher as compared to the n-heptane fuel for both nonpremixed and premixed flames. Comparison of aromatics and soot volume fraction in nonpremixed and premixed flames shows significant differences in the spatial development of aromatics and soot along the downstream direction. The results from the model combustor indicate that, within experiment uncertainty, the net soot production is similar in both n-heptane and n-hexadecane fuel mixtures. Finally, we draw conclusions about important processes for soot formation in gas turbine combustor and what can be learned from laboratory-scale flames.
    • Download: (3.429Mb)
    • Show Full MetaData Hide Full MetaData
    • Get RIS
    • Item Order
    • Go To Publisher
    • Statistics

      Effects of Fuel Molecular Weight on Emissions in a Jet Flame and a Model Gas Turbine Combustor

    URI
    https://yetl.yabesh.ir/yetl1/handle/yetl/4251237
    Collections
    • Journal of Engineering for Gas Turbines and Power

    Show full item record

    contributor authorMakwana, Anandkumar
    contributor authorIyer, Suresh
    contributor authorLinevsky, Milton
    contributor authorSantoro, Robert
    contributor authorLitzinger, Thomas
    contributor authorO'Connor, Jacqueline
    date accessioned2019-02-28T10:57:57Z
    date available2019-02-28T10:57:57Z
    date copyright10/17/2017 12:00:00 AM
    date issued2018
    identifier issn0742-4795
    identifier othergtp_140_03_031505.pdf
    identifier urihttp://yetl.yabesh.ir/yetl1/handle/yetl/4251237
    description abstractThe objective of this study is to understand the effects of fuel volatility on soot emissions. This effect is investigated in two experimental configurations: a jet flame and a model gas turbine combustor. The jet flame provides information about the effects of fuel on the spatial development of aromatics and soot in an axisymmetric, co-flow, laminar flame. The data from the model gas turbine combustor illustrate the effect of fuel volatility on net soot production under conditions similar to an actual engine at cruise. Two fuels with different boiling points are investigated: n-heptane/n-dodecane mixture and n-hexadecane/n-dodecane mixture. The jet flames are nonpremixed and rich premixed flames in order to have fuel conditions similar to those in the primary zone of an aircraft engine combustor. The results from the jet flames indicate that the peak soot volume fraction produced in the n-hexadecane fuel is slightly higher as compared to the n-heptane fuel for both nonpremixed and premixed flames. Comparison of aromatics and soot volume fraction in nonpremixed and premixed flames shows significant differences in the spatial development of aromatics and soot along the downstream direction. The results from the model combustor indicate that, within experiment uncertainty, the net soot production is similar in both n-heptane and n-hexadecane fuel mixtures. Finally, we draw conclusions about important processes for soot formation in gas turbine combustor and what can be learned from laboratory-scale flames.
    publisherThe American Society of Mechanical Engineers (ASME)
    titleEffects of Fuel Molecular Weight on Emissions in a Jet Flame and a Model Gas Turbine Combustor
    typeJournal Paper
    journal volume140
    journal issue3
    journal titleJournal of Engineering for Gas Turbines and Power
    identifier doi10.1115/1.4037928
    journal fristpage31505
    journal lastpage031505-9
    treeJournal of Engineering for Gas Turbines and Power:;2018:;volume( 140 ):;issue: 003
    contenttypeFulltext
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian
     
    DSpace software copyright © 2002-2015  DuraSpace
    نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
    yabeshDSpacePersian