Show simple item record

contributor authorGuruswamy, Guru P.
date accessioned2017-11-25T07:20:39Z
date available2017-11-25T07:20:39Z
date copyright2017/10/1
date issued2017
identifier issn0022-0434
identifier otherds_139_03_031005.pdf
identifier urihttp://138.201.223.254:8080/yetl1/handle/yetl/4236597
description abstractA modular procedure is presented to simulate moving control surfaces within an overset grid environment using the Navier–Stokes equations. Gaps are modeled by locally shearing the wing grids instead of using separate grids to model gaps. Grid movements for control surfaces are defined through a separate module, which is driven by an external grid generation tool. Results are demonstrated for a wing with a part-span control surface. Grids for the test case are determined from detailed grid sensitivity studies based on both nonoscillating and oscillating cases. Steady and, for the first time, unsteady pressures from overset grid computations are validated with wind tunnel data. This paper addresses the current needs of high-fidelity flow modeling to design advanced active-controls.
publisherThe American Society of Mechanical Engineers (ASME)
titleModeling of Oscillating Control Surfaces Using Overset-Grid-Based Navier–Stokes Equations Solver
typeJournal Paper
journal volume139
journal issue3
journal titleJournal of Dynamic Systems, Measurement, and Control
identifier doi10.1115/1.4034945
journal fristpage31005
journal lastpage031005-8
treeJournal of Dynamic Systems, Measurement, and Control:;2017:;volume( 139 ):;issue: 003
contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record