A Generalized Hypoid Gear Synthesized With Common Crown Rack Positioned Between Pinion and Gear BlanksSource: Journal of Mechanical Design:;2017:;volume( 139 ):;issue: 008::page 85001Author:Park, Nogill
DOI: 10.1115/1.4036779Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: A new hypoid gearing using a common crown rack is introduced. The proposed hypoid gear has no unloaded gear transmission error. The common crown rack is located at a neutral position between the pinion and gear blanks. An arbitrary generating surface inclined at a pressure angle is prescribed. The proposed hypoid gearing is in point contact, fulfilling a constant speed ratio along the curved line of action. The synthesis feasibility is numerically verified for the entire range of hypoid gears, including parallel-, intersecting-, and crossed-axis gear systems. The proposed hypoid gear is compared with the hypoid gear by Gleason method and the differences between the two are discussed.
|
Collections
Show full item record
| contributor author | Park, Nogill | |
| date accessioned | 2017-11-25T07:18:08Z | |
| date available | 2017-11-25T07:18:08Z | |
| date copyright | 2017/14/6 | |
| date issued | 2017 | |
| identifier issn | 1050-0472 | |
| identifier other | md_139_08_085001.pdf | |
| identifier uri | http://138.201.223.254:8080/yetl1/handle/yetl/4234992 | |
| description abstract | A new hypoid gearing using a common crown rack is introduced. The proposed hypoid gear has no unloaded gear transmission error. The common crown rack is located at a neutral position between the pinion and gear blanks. An arbitrary generating surface inclined at a pressure angle is prescribed. The proposed hypoid gearing is in point contact, fulfilling a constant speed ratio along the curved line of action. The synthesis feasibility is numerically verified for the entire range of hypoid gears, including parallel-, intersecting-, and crossed-axis gear systems. The proposed hypoid gear is compared with the hypoid gear by Gleason method and the differences between the two are discussed. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | A Generalized Hypoid Gear Synthesized With Common Crown Rack Positioned Between Pinion and Gear Blanks | |
| type | Journal Paper | |
| journal volume | 139 | |
| journal issue | 8 | |
| journal title | Journal of Mechanical Design | |
| identifier doi | 10.1115/1.4036779 | |
| journal fristpage | 85001 | |
| journal lastpage | 085001-9 | |
| tree | Journal of Mechanical Design:;2017:;volume( 139 ):;issue: 008 | |
| contenttype | Fulltext |