| contributor author | Nistor, Liviu | |
| contributor author | Neag, Adriana | |
| contributor author | Marian, Ionut | |
| contributor author | Frunza, Dan | |
| date accessioned | 2017-11-25T07:17:33Z | |
| date available | 2017-11-25T07:17:33Z | |
| date copyright | 2016/29/9 | |
| date issued | 2016 | |
| identifier issn | 1087-1357 | |
| identifier other | manu_138_12_121015.pdf | |
| identifier uri | http://138.201.223.254:8080/yetl1/handle/yetl/4234644 | |
| description abstract | In this paper, the cold simultaneous toothing of spur gears has been investigated. This method can be described as a press-rolling process. The influence of gear geometry such as teeth number and the deformation mechanism was investigated by 3D finite-element analysis using forge® software in terms of teeth forming and forming loads evolution. Based on these simulations, the experimental investigations were carried out to obtain a spur gear form with the good quality, using several billet dimensions. The experimental trials and simulations conducted for the spur gear (z = 23 teeth and m = 1.5 mm) showed premises to continuous flow lines formation at the base of the teeth. The maximum pressing force results from the numerical simulation agree with the experimental maximum force recorded. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | Experimental and Numerical Simulation Study of Simultaneous Toothing of Spur Gears by Press-Rolling Process | |
| type | Journal Paper | |
| journal volume | 138 | |
| journal issue | 12 | |
| journal title | Journal of Manufacturing Science and Engineering | |
| identifier doi | 10.1115/1.4034493 | |
| journal fristpage | 121015 | |
| journal lastpage | 121015-7 | |
| tree | Journal of Manufacturing Science and Engineering:;2016:;volume( 138 ):;issue: 012 | |
| contenttype | Fulltext | |