Plane-Strain Shear Dislocation on a Leaky Plane in a Poroelastic SolidSource: Journal of Applied Mechanics:;2017:;volume( 084 ):;issue: 002::page 21008DOI: 10.1115/1.4035179Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Solutions for the stress and pore pressure p are derived due to sudden introduction of a plane strain shear dislocation on a leaky plane in a linear poroelastic, fluid-infiltrated solid. For a leaky plane, y=0, the fluid mass flux is proportional to the difference in pore pressure across the plane requiring that Δp=R∂p/∂y, where R is a constant resistance. For R=0 and R→∞, the expressions for the stress and pore pressure reduce to previous solutions for the limiting cases of a permeable or impermeable plane, respectively. Solutions for the pore pressure and shear stress on and near y=0 depend significantly on the ratio of x and R. For the leaky plane, the shear stress at y=0 initially increases from the undrained value, as it does from the impermeable plane, but the peak becomes less prominent as the distance x from the dislocation increases. The slope (∂σxy/∂t) at t=0 for the leaky plane is always equal to that of the impermeable plane for any large but finite x. In contrast, the slope ∂σxy/∂t for the permeable fault is negative at t=0. The pore pressure on y=0 initially increases as it does for the impermeable plane and then decays to zero, but as for the shear stress, the increase becomes less with increasing distance x from the dislocation. The rate of increase at t=0 is equal to that for the impermeable fault.
|
Collections
Show full item record
| contributor author | Song, Yongjia | |
| contributor author | Rudnicki, John W. | |
| date accessioned | 2017-11-25T07:15:53Z | |
| date available | 2017-11-25T07:15:53Z | |
| date copyright | 2016/21/11 | |
| date issued | 2017 | |
| identifier issn | 0021-8936 | |
| identifier other | jam_084_02_021008.pdf | |
| identifier uri | http://138.201.223.254:8080/yetl1/handle/yetl/4233720 | |
| description abstract | Solutions for the stress and pore pressure p are derived due to sudden introduction of a plane strain shear dislocation on a leaky plane in a linear poroelastic, fluid-infiltrated solid. For a leaky plane, y=0, the fluid mass flux is proportional to the difference in pore pressure across the plane requiring that Δp=R∂p/∂y, where R is a constant resistance. For R=0 and R→∞, the expressions for the stress and pore pressure reduce to previous solutions for the limiting cases of a permeable or impermeable plane, respectively. Solutions for the pore pressure and shear stress on and near y=0 depend significantly on the ratio of x and R. For the leaky plane, the shear stress at y=0 initially increases from the undrained value, as it does from the impermeable plane, but the peak becomes less prominent as the distance x from the dislocation increases. The slope (∂σxy/∂t) at t=0 for the leaky plane is always equal to that of the impermeable plane for any large but finite x. In contrast, the slope ∂σxy/∂t for the permeable fault is negative at t=0. The pore pressure on y=0 initially increases as it does for the impermeable plane and then decays to zero, but as for the shear stress, the increase becomes less with increasing distance x from the dislocation. The rate of increase at t=0 is equal to that for the impermeable fault. | |
| publisher | The American Society of Mechanical Engineers (ASME) | |
| title | Plane-Strain Shear Dislocation on a Leaky Plane in a Poroelastic Solid | |
| type | Journal Paper | |
| journal volume | 84 | |
| journal issue | 2 | |
| journal title | Journal of Applied Mechanics | |
| identifier doi | 10.1115/1.4035179 | |
| journal fristpage | 21008 | |
| journal lastpage | 021008-8 | |
| tree | Journal of Applied Mechanics:;2017:;volume( 084 ):;issue: 002 | |
| contenttype | Fulltext |