| contributor author | A. Genovez | |
| contributor author | S. Abt | |
| contributor author | B. Florentin | |
| contributor author | A. Garton | |
| date accessioned | 2017-05-08T20:47:54Z | |
| date available | 2017-05-08T20:47:54Z | |
| date copyright | November 1993 | |
| date issued | 1993 | |
| identifier other | %28asce%290733-9437%281993%29119%3A6%281081%29.pdf | |
| identifier uri | http://yetl.yabesh.ir/yetl/handle/yetl/27502 | |
| description abstract | A study was conducted in the Hydraulics Laboratory of Colorado State University to evaluate how settlement affects the accuracy of 30.5‐ and 61.0‐cm (1‐ and 2‐ft) prefabricated metal Parshall flumes. The flumes were installed and tested for lateral, longitudinal, and combined lateral‐longitudinal slopes settlements. Flume slopes varied ±7%, and were conducted for free outfall conditions. The results indicated that the Parshall flume accuracy is slope‐dependent. The flume rating was in error approximately 28% for longitudinal slopes of ±5%, and approximately 10% for lateral settlement of ±5%. Flow rates used in this study ranged from 0.01 to 0.20 m | |
| publisher | American Society of Civil Engineers | |
| title | Correction for Settlement of Parshall Flume | |
| type | Journal Paper | |
| journal volume | 119 | |
| journal issue | 6 | |
| journal title | Journal of Irrigation and Drainage Engineering | |
| identifier doi | 10.1061/(ASCE)0733-9437(1993)119:6(1081) | |
| tree | Journal of Irrigation and Drainage Engineering:;1993:;Volume ( 119 ):;issue: 006 | |
| contenttype | Fulltext | |
