Journal of Fluids Engineering: Recent submissions
Now showing items 8221-8240 of 9024
-
Discussion: “Free Shear Layer Behavior in Rotating Systems” (Rothe, P. H., and Johnston, J. P., 1979, ASME J. Fluids Eng., 101, pp. 117–120)
(The American Society of Mechanical Engineers (ASME), 1979) -
The Interaction of Solid or Liquid Particles and Turbulent Fluid Flow Fields—A Numerical Simulation
(The American Society of Mechanical Engineers (ASME), 1979)Using a simple model of turbulence a simulation is made of the interaction of an ensemble of discrete solid or liquid particles and a fluid continuum. Two notional one - dimensional systems ... -
The Propagation of Boiling Boundary Phase-Change Fronts in Moving Fluids
(The American Society of Mechanical Engineers (ASME), 1979)The transient propagation of boiling boundary phase-change fronts during the depressurization of a subcooled liquid has been investigated for the case of thermal equilibrium without friction or ... -
Effects of Additive Ejection on Lifting Hydrofoils
(The American Society of Mechanical Engineers (ASME), 1979)Various effects of polymer additives, other than drag reduction, are discussed with an emphasis on lift effects on two-dimensional hydrofoils. In reviewing effects of additives in homogeneous ... -
Two-Dimensional Laminar Flow in Elbows
(The American Society of Mechanical Engineers (ASME), 1979)A finite difference procedure is employed to evaluate the primary flow field in two typical elbows. The first has an internal wall radius equal to the width; the internal radius of the second ... -
Numerical Analysis of Turbulent Flow Along an Abruptly Rotated Cylinder
(The American Society of Mechanical Engineers (ASME), 1979)A parabolic system of equations governing turbulent, incompressible fluid motion along a stationary cylinder fitted with a rotating aft-section is solved with an implicit finite-difference algorithm. ... -
Torque Characteristics for Spherical Annulus Flow
(The American Society of Mechanical Engineers (ASME), 1979)The torque needed to rotate concentric spheres when the spherical annulus gap between them is filled with a viscous fluid depends on the Reynolds number and the ratio of the angular velocities ... -
Frictional Resistance of Enclosed Rotating Cones With Superposed Throughflow
(The American Society of Mechanical Engineers (ASME), 1979)The research summarized in this paper is an experimental study of the frictional moment on a cone rotating in a conical casing with an outward throughflow. The cone vertex angles tested in ... -
Discussion: “Fillet Size in a Liquid Jet” (Pimbley, W. T., and Rickenbach, D. H., 1979, ASME J. Fluids Eng., 101, pp. 105–108)
(The American Society of Mechanical Engineers (ASME), 1979) -
Subsonic Turbulent Flow Past a Downstream Facing Annular Step
(The American Society of Mechanical Engineers (ASME), 1979)The flow past a downstream facing annular step was experimentally investigated in the Mach range of 0.1 to 0.95. The approaching flow was steady and uniform. The boundary layer ahead of the ... -
On the Motion of Rectangular Prismatic Bodies
(The American Society of Mechanical Engineers (ASME), 1979)Rectangular prismatic bodies can assume either a translatory or an auto-rotating mode of motion during free motion in the atmosphere. The translatory mode is stable only when the dimensionless ... -
A Fundamental Criterion for the Application of Rotor Casing Treatment
(The American Society of Mechanical Engineers (ASME), 1979)An experimental investigation has been carried out on the influence of grooved casing treatment on the stall margin of a compressor rotor. Tests were conducted with two rotor builds having ... -
Flow and Pressure Characteristics Downstream of a Segmental Blockage in a Turbulent Pipe Flow
(The American Society of Mechanical Engineers (ASME), 1979)Two mutually complementary sets of experiments were performed to study the flow and pressure fields created by the presence of a segmental orifice plate in a circular tube. In one set of ... -
Turbulent Flow Measurements by Laser-Doppler Anemometry in Motored Piston-Cylinder Assemblies
(The American Society of Mechanical Engineers (ASME), 1979)Laser-Doppler anemometry has been used to quantify the mean velocity and turbulence characteristics of the isothermal, incompressible flow within a piston-cylinder arrangement motored without ... -
Trajectories of Single and Double Jets Injected Into a Crossflow of Arbitrary Velocity Distribution
(The American Society of Mechanical Engineers (ASME), 1979)This paper describes the results of our experiments on and theoretical predictions of the trajectories of multiple buoyant and nonbuoyant jets. Our theoretical calculations employed a finite ... -
Swirling Flow Through Annular Diffusers With Conical Walls
(The American Society of Mechanical Engineers (ASME), 1979)The performance of a series of diffusers of various lengths, area ratios and cant angles was determined experimentally over a range of inlet flow swirl angles between axial and 48 degrees. ... -
Discussion: “A Numerical Study of the Laminar Viscous Incompressible Flow Through a Pipe Orifice” (Nigro, F. E. B., Strong, A. B., and Alpay, S. A., 1978, ASME J. Fluids Eng., 100, pp. 467–472)
(The American Society of Mechanical Engineers (ASME), 1979) -
Vortex Motions Induced by V-Grooved Rotating Cylinders and Their Effect on Mixing Performance
(The American Society of Mechanical Engineers (ASME), 1979)A numerical study of the fluid flows generated in the annular space between a rotating V-grooved cylinder and a hollow cylindrical shell is presented. The numerical procedures used to obtain ... -
Discussion: “On the Flow Regimes of Downhole Flow of a Gas-Particle Mixture” (Stokes, V. K., 1978, ASME J. Fluids Eng., 100, pp. 410–412)
(The American Society of Mechanical Engineers (ASME), 1979) -
Discussion: “An Experimental Study of the Flow-Induced Motions of a Flexible Cylinder in Axial Flow” (Ni, C. C., and Hansen, R. J., 1978, ASME J. Fluids Eng., 100, pp. 389–394)
(The American Society of Mechanical Engineers (ASME), 1979)