Journal of Fluids Engineering: Recent submissions
Now showing items 8141-8160 of 9024
-
Flow Visualization
(The American Society of Mechanical Engineers (ASME), 1980) -
Laminar Flow Forced Convection in Ducts
(The American Society of Mechanical Engineers (ASME), 1980) -
Dimensionless Correlation of the Hanging Film Phenomenon
(The American Society of Mechanical Engineers (ASME), 1980)The hanging film experiments of Wallis and Makkenchery and Pushkina and Sorokin are reviewed. The results indicate that the product of the Kutateladze number and the square root of the gas ... -
Discussion: “Lower Mode Response of Circular Cylinders in Cross-Flow” (Durgin, W. W., March, P. A., and Lefebvre, P. J., 1980, ASME J. Fluid Eng., 102, pp. 183–189)
(The American Society of Mechanical Engineers (ASME), 1980) -
Calculation of Turbulent Wall Jets With an Algebraic Reynolds Stress Model
(The American Society of Mechanical Engineers (ASME), 1980)A modified version of the k-ε turbulence model is developed which predicts well the main features of turbulent wall jets. The model relates the turbulent shear stress to the mean velocity ... -
Aspects of Outflow From Large Vessels
(The American Society of Mechanical Engineers (ASME), 1980)An investigation has been made of flow phenomena associated with outflow from large horizontal cylindrical vessels with a vortex-free outlet on their bottom surface. This paper concentrates on ... -
Linearized Solutions for the Supersonic Flow Through Turbomachinery Blade Rows (Using Actuator Disk Theory)
(The American Society of Mechanical Engineers (ASME), 1980)An actuator disk method is developed for calculating the flow through the blade rows of a turbomachine in which the velocity relative to the blading may be supersonic. The method is compared ... -
The Influence of Inlet Conditions on the Performance of Annular Diffusers
(The American Society of Mechanical Engineers (ASME), 1980)Low speed tests have been carried out to investigate the performance and mechanism of flow in two annular diffusers having center bodies of uniform diameter and conically diverging outer walls. ... -
Three Dimensional Supersonic Flow Through a Cascade of Twisted Flat Plates
(The American Society of Mechanical Engineers (ASME), 1980)The three-dimensional flow through a cascade of twisted flat-plate blades is calculated using a computer program based on a finite-difference approximation to the method of characteristics. The ... -
Turbulent Boundary Layers With Unsteady Injection-Suction
(The American Society of Mechanical Engineers (ASME), 1980)The time dependent turbulent boundary-layer equations with a two-layer eddy viscosity model are integrated numerically over a porous flat plate for a steady outer flow and a sinusoidally distributed ... -
Annular Liquid Jet Experiments
(The American Society of Mechanical Engineers (ASME), 1980)Experiments have been performed to determine the length for convergence or closure of a vertical, hollow annular water jet due to the action of surface tension forces. The data agree well ... -
The Flow Properties of Rooms With Small Ventilation Openings
(The American Society of Mechanical Engineers (ASME), 1980)Measured and calculated properties relevant to the flow in ventilated rooms are reported. The measurements were obtained by laser-Doppler anemometry in a small-scale model room with a single ... -
Effect of Wake-Type Nonuniform Inlet Velocity Profiles on First Appreciable Stall in Plane-Wall Diffusers
(The American Society of Mechanical Engineers (ASME), 1980)The combustor diffuser in a gas turbine engine must accept a high-speed, unsteady, distorted flow from the engine compressor. It must deliver flow to the combustor with minimum loss in total ... -
Flow Measurements in a Turbine Scroll
(The American Society of Mechanical Engineers (ASME), 1980)A study was conducted to determine experimentally the flow behavior in the combined scroll nozzle assembly of a radial inflow turbine. Hot film anemometry technique was used to measure the ... -
Analysis of the Three-Dimensional Flow in a Turbine Scroll
(The American Society of Mechanical Engineers (ASME), 1980)The present analysis describes the three dimensional compressible inviscid flow in the scroll and the vaneless nozzle of a radial inflow turbine. The solution to this flow field, which is ... -
Investigation of a Reattaching Turbulent Shear Layer: Flow Over a Backward-Facing Step
(The American Society of Mechanical Engineers (ASME), 1980)Incompressible flow over a backward-facing step is studied in order to investigate the flow characteristics in the separated shear-layer, the reattachment zone, and the redeveloping boundary layer ... -
Straight-Walled, Two-Dimensional Diffusers—Transitory Stall and Peak Pressure Recovery
(The American Society of Mechanical Engineers (ASME), 1980)Straight-walled, two-dimensional diffusers of large aspect ratio were investigated experimentally for the purpose of studying the regime of incipient transitory stall, the location of the geometry ... -
Transonic Inlet Flow Calculations Using a General Grid-Generation Scheme
(The American Society of Mechanical Engineers (ASME), 1980)Finite difference solutions for transonic flowfields about engine inlet nacelles are obtained by combining a general grid-generation scheme with a previously developed general solver for transonic ... -
Discussion: “Straight-Walled, Two-Dimensional Diffusers—Transitory Stall and Peak Pressure Recovery” (Ashjaee, J., and Johnston, J. P., 1980, ASME J. Fluid Eng., 102, pp. 275–282)
(The American Society of Mechanical Engineers (ASME), 1980) -
Discussion: “An Increase in Base Pressure by Polymer Solutions Added to Separated Shear Layers” (Kiya, M., Arie, M., and Shoda, S., 1980, ASME J. Fluids Eng., 102, pp. 376–382)
(The American Society of Mechanical Engineers (ASME), 1980)