Journal of Fluids Engineering: Recent submissions
Now showing items 7801-7820 of 9024
-
The Viscous-Gravity Jet in Stagnation Flow
(The American Society of Mechanical Engineers (ASME), 1982)Simple solutions are presented for the equation governing one-dimensional flow of very viscous jets that issue from a round orifice and fall against a flat plate. Due to the viscous axial ... -
On the Prediction of Swirling Flowfields Found in Axisymmetric Combustor Geometries
(The American Society of Mechanical Engineers (ASME), 1982)Combustor modeling has reached the stage where the most useful research activities are likely to be on specific sub-problems of the general three-dimensional turbulent reacting flow problem. The ... -
The Form Drag of Three-Dimensional Bluff Bodies Immersed in Turbulent Boundary Layers
(The American Society of Mechanical Engineers (ASME), 1982)Measurements of the pressure distributions on the three-dimensional bluff bodies are correlated with the characteristics of the smooth-wall turbulent boundary layers in which the bodies are immersed. ... -
Flow Aerodynamics Modeling of an MHD Swirl Combustor: Calculations and Experimental Verification
(The American Society of Mechanical Engineers (ASME), 1982)This paper describes a computer code for calculating the flow dynamics of constant density flow in the second stage trumpet shaped nozzle section of a two stage MHD swirl combustor for ... -
Observations and Measurements of Flow in a Partially-Filled Horizontally Rotating Cylinder
(The American Society of Mechanical Engineers (ASME), 1982)The authors report measurements of azimuthal velocity versus radius in a partially-filled horizontally rotating cylinder. These data confirm theoretical calculations for laminar flow. Three nonlaminar ... -
Transient Response of Fluid Viscoelastic Lines
(The American Society of Mechanical Engineers (ASME), 1982)Basic relations and method of solution are given for laminar transient flows in linear viscoelastic circular fluid transmission lines. Using a numerical method to invert the Laplace-Carson ... -
The Structure of Turbulent Plane Couette Flow
(The American Society of Mechanical Engineers (ASME), 1982)Measurements of time-mean velocity, of longitudinal, normal and lateral velocity fluctuation intensities (u′ , v′ , w′ ) and of shear stress have been made for four cases of pure shear flow ... -
Experiments on Fluidelastic Instability of Cylinder Clusters in Axial Flow
(The American Society of Mechanical Engineers (ASME), 1982)This paper presents a summary of the general behavior of cylinder clusters in axial flow and especially of the fluidelastic instabilities which occur at high flow velocities. Experiments were ... -
Discussion: “Flow Behind Two Coaxial Circular Cylinders” (Ko, N. W. M., 1982, ASME J. Fluids Eng., 104, pp. 223–227)
(The American Society of Mechanical Engineers (ASME), 1982) -
Recent Developments in Particulate/Gas Separation
(The American Society of Mechanical Engineers (ASME), 1982) -
Discussion: “Effects of Free-Stream Turbulence on Diffuser Performance” (Hoffmann, J. A., 1981, ASME J. Fluids Eng., 103, pp. 385–390)
(The American Society of Mechanical Engineers (ASME), 1982) -
Cumulative Plastic Deformation in Rolling Contact
(The American Society of Mechanical Engineers (ASME), 1963)Plastic deformation that accumulates with running time may constitute a mode of failure in some rolling element applications, particularly at elevated temperature. This phenomenon is studied in ... -
Particle Sizing Techniques and Their Applications
(The American Society of Mechanical Engineers (ASME), 1982) -
Assessment of Present and Future Directions of Polyphase Transport
(The American Society of Mechanical Engineers (ASME), 1982) -
Discussion: “Scaling Parameters for a Time-Averaged Separation Bubble” (Smits, A. J., 1982, ASME J. Fluids Eng., 104, pp. 178–184)
(The American Society of Mechanical Engineers (ASME), 1982) -
Two-Way Coupling Effects in Dilute Gas-Particle Flows
(The American Society of Mechanical Engineers (ASME), 1982)A general analysis of gas-particle flows, under the hypotheses of number of particles large enough to consider the solid phase as a continuum and of volume fraction small enough to consider ... -
Erratum: “A Four Hole Pressure Probe For Fluid Flow Measurements in Three Dimensions” (Journal of Fluids Engineering, 1981, 103, pp. 590–594)
(The American Society of Mechanical Engineers (ASME), 1982) -
Discussion: “Laminar Boundary Layer Near the Rotating End Wall of a Confined Vortex” (Shakespeare, W. J., and Levy, E. K., 1982, ASME J. Fluids Eng., 104, pp. 171–177)
(The American Society of Mechanical Engineers (ASME), 1982) -
Discussion: “Preston Tube Calibrations and Direct Force Floating Element Measurements in a Two-Dimensional Turbulent Boundary Layer” (McAllister, J. E., Pierce, F. J., and Tennant, M. H., 1982, ASME J. Fluids Eng., 104, pp. 156–161)
(The American Society of Mechanical Engineers (ASME), 1982) -
Diagnostic Measurements of Fuel Spray Dispersion
(The American Society of Mechanical Engineers (ASME), 1982)Plume shape, vaporization, droplet-size distribution, and number density of a solid-cone fuel spray were studied with both conventional and novel measurement techniques. Minor differences in spray ...