Journal of Fluids Engineering: Recent submissions
Now showing items 6041-6060 of 9024
-
Impact Strength of Austenitic Stainless-Steel Welds at −320 F—Effects of Composition, Ferrite Content, and Heat-Treatment
(The American Society of Mechanical Engineers (ASME), 1966)A statistical evaluation has been made of the effect of weld rod composition, ferrite content, and heat-treatment upon the impact strength of certain austenitic stainless-steel welds in 304 ... -
A Study of the Response of a Small Porous Chamber to Forced Oscillation
(The American Society of Mechanical Engineers (ASME), 1966)An analytical investigation of the pressure response to forced volume oscillations of a shallow cylindrical chamber with a porous end is undertaken. Investigation is in the frequency domain. ... -
An Experimental Study of the Response of a Small Porous Chamber to Forced Oscillations
(The American Society of Mechanical Engineers (ASME), 1966)An experimental program was undertaken to evaluate the theoretical relation between pressure phase angle and frequency for forced oscillations of a small porous chamber. The data were found to ... -
Discussion: “Effect of Wall Thickness on Stress-Rupture Life of Tubular Specimens” (Tucker, Jr., J. T., Coulter, E. E., and Kooistra, L. F., 1960, ASME J. Basic Eng., 82, pp. 465–473)
(The American Society of Mechanical Engineers (ASME), 1960) -
Carbon and Carbon-Moly Steam Pipe After Long-Time Service
(The American Society of Mechanical Engineers (ASME), 1966)Medium-carbon steel piping, after about 200,000 hr of service, and carbon–0.5 molybdenum steel piping, after about 150,000 hr of service, have been evaluated to determine the effect of prolonged ... -
Quadrant-Edge Orifice and Performance at Very High Reynolds Numbers
(The American Society of Mechanical Engineers (ASME), 1966)This paper presents the results of an experimental investigation on the discharge coefficient of a quadrant-edge orifice meter at high Reynolds numbers (in the range of 20,000 to 600,000). ... -
Effect of Creep Exposure on the Fracture Toughness of Two Low Alloy Steels
(The American Society of Mechanical Engineers (ASME), 1966) -
Relationship of Prior Creep Exposure to Strength of Wrought Udimet 700 Nickel-Base Alloy
(The American Society of Mechanical Engineers (ASME), 1966) -
Preliminary Experiments With Foil Bearings
(The American Society of Mechanical Engineers (ASME), 1966)A capacitive probe, coincident with the surface of a revolving drum, scans the air gap between a flexible foil and the rotating cylinder. Preliminary measurements of foil displacement are made ... -
Discussion: “Externally Pressurized Foil Gas Bearings” (Barlow, E. J., 1965, ASME J. Basic Eng., 87, pp. 986–990)
(The American Society of Mechanical Engineers (ASME), 1966) -
Response: To the Comments by Drs. W. Shyy and M. Sindir
(The American Society of Mechanical Engineers (ASME), 1994) -
Editorial
(The American Society of Mechanical Engineers (ASME), 1994) -
U.S. Technological Competitiveness: A Fluids Engineers’ Viewpoint (Column #6—Epilogue)
(The American Society of Mechanical Engineers (ASME), 1994) -
Editorial
(The American Society of Mechanical Engineers (ASME), 1994) -
Response: To the Comments by Drs. W. Shyy and M. Sindir
(The American Society of Mechanical Engineers (ASME), 1994) -
Boundary Layer Theory for a Particulate Suspension
(The American Society of Mechanical Engineers (ASME), 1994)Order of magnitude considerations are employed to develop boundary layer equations for two phase particle/fluid suspension flows. It is demonstrated that a variety of possibilities exist and three ... -
Numerical Simulation of Heavy Particle Dispersion—Scale Ratio and Flow Decay Considerations
(The American Society of Mechanical Engineers (ASME), 1994)Lagrangian statistical quantities related to the dispersion of heavy particles were studied numerically by following particle trajectories in a random flow generated by Fourier modes. An experimental ... -
Questions in Fluid Mechanics: Reynolds Number Effects in Wall-Bounded Flows
(The American Society of Mechanical Engineers (ASME), 1994) -
Flow Through Porous Media of Packed Spheres Saturated With Water
(The American Society of Mechanical Engineers (ASME), 1994)The existing literature on the flow of fluids through porous packed beds gives very limited quantitative information on the criteria employed in marking the applicability of the different flow ... -
Asymptotic Wake Behavior of Swept, Blunt Trailing-Edge Airfoils
(The American Society of Mechanical Engineers (ASME), 1994)The effect of base sweep and the addition of passive flow-control devices at constant base sweep angle (30 deg) on the asymptotic behavior of turbulent wakes produced by flatplate airfoils was ...