Journal of Manufacturing Science and Engineering: Recent submissions
Now showing items 7241-7260 of 7723
-
Discussion: “Influence of Axial Load, Track Gage, and Wheel Profile on Rail Vehicle Hunting” (Hannebrink, D. N., Lee, H. S. H., Weinstock, H., and Hedrick, J. K., 1977, ASME J. Eng. Ind., 99, pp. 186–195)
(The American Society of Mechanical Engineers (ASME), 1977) -
Discussion: “Influence of Nonlinear Wheel/Rail Contact Geometry on Stability of Rail Vehicles” (Hull, R., and Cooperrider, N. K., 1977, ASME J. Eng. Ind., 99, pp. 172–185)
(The American Society of Mechanical Engineers (ASME), 1977) -
Discussion: “Dynamic Simulation of Planar Mechanical Systems With Lubricated Bearing Clearances Using Vector-Network Methods” (Rogers, R. J., and Andrews, G. C., 1977, ASME J. Eng. Ind., 99, pp. 131–137)
(The American Society of Mechanical Engineers (ASME), 1977) -
Discussion: “Stiffness of Machine Tool Joints: A Random Process Approach” (Thomas, T. R., and Sayles, R. S., 1977, ASME J. Eng. Ind., 99, pp. 250–256)
(The American Society of Mechanical Engineers (ASME), 1977) -
Discussion: “Mechanical Couplings—A Geometrical Theory” (Fichter, E. F., and Hunt, K. H., 1977, ASME J. Eng. Ind., 99, pp. 77–87)
(The American Society of Mechanical Engineers (ASME), 1977) -
Discussion: “A Regenerative Compressor” (Sixsmith, H., and Altmann, H., 1977, ASME J. Eng. Ind., 99, pp. 637–647)
(The American Society of Mechanical Engineers (ASME), 1977) -
Displacement of a Ring Subject to Uniform Radial Loads
(The American Society of Mechanical Engineers (ASME), 1976)Thick rings are extensively used in various machine elements and structures. These rings are ordinarily acted upon by irregular loadings on their boundaries. However, there are cases where the ... -
Spin-Decoupled Projectiles: Relationship of Spin to Muzzle Velocity
(The American Society of Mechanical Engineers (ASME), 1976)A rationale is presented to explain the decrease in spin rate which frequently accompanies an increase in muzzle velocity for gun projectiles fitted with plastic sealing bands. -
Discussion: “The Effect of Receiver Pressure on the Observed Flow Pattern in the Hydrostatic Extrusion of Bimetal Rods” (Story, J. M., Avitzur, B., and Hahn, Jr., W. C., 1976, ASME J. Eng. Ind., 98, pp. 909–913)
(The American Society of Mechanical Engineers (ASME), 1976) -
Design Coefficients for Rings Loaded Out-of-Plane
(The American Society of Mechanical Engineers (ASME), 1976)This article provides the solution to twelve cases of a ring loaded out of its plane. Each solution may be combined with the others so that many different loading cases may be solved from ... -
Stress Concentration Factors From Overlapping Stress Fields in Uniaxial Tension
(The American Society of Mechanical Engineers (ASME), 1976)Standard transmission photoelastic techniques were used to determine the resultant stress concentration factors produced by multiple stress raisers in flat, rectangular bars under uniaxial tension. ... -
A Modal Transient Simulation Model for Flexible Asymmetric Rotors
(The American Society of Mechanical Engineers (ASME), 1976)A simulation model is developed which accounts for an orthotropic as opposed to an axisymmetric rotor, i.e., rotors are considered whose stiffness and inertial properties in two mutually orthogonal ... -
Application of the Optimal Preview Control Theory to the Vibration Reduction of the Elastic Beam under Moving Load
(The American Society of Mechanical Engineers (ASME), 1976)In this paper, the vibration reduction problem of simply supported beam excited by distributed random moving load is investigated. The optimal transfer functions of preview filters, of which ... -
Dynamics of a Power Collector With Friction Dampers
(The American Society of Mechanical Engineers (ASME), 1976)Using the friction damper, the construction of power collector for a very high-speed railway will be considerably simplified. In this paper, the power collector with friction dampers is considered, ... -
Vibration of an Asymmetrically Mounted Rotor With Gyroscopic Effects
(The American Society of Mechanical Engineers (ASME), 1976)The equations of motion for the asymmetrically mounted rotor with gyroscopic effects contain periodic coefficients. These periodic coefficients which arise from the system asymmetries cannot be ... -
Determination of Optimum Machining Conditions—Deterministic and Probabilistic Approaches
(The American Society of Mechanical Engineers (ASME), 1976)The mathematical programing techniques are applied to determine the optimum cutting parameters of machining operations. Three objectives, the cost of production per piece, the production rate, and ... -
Estimation of Cumulative Fatigue Damage Under Random Loading
(The American Society of Mechanical Engineers (ASME), 1976)A method is presented that leads to accurate estimation of the cumulative fatigue damage incurred in a randomly loaded structural element when loading is given in the form of spectral density ... -
In-Process Analysis of Machine Tool Structure Dynamics and Prediction of Machining Chatter
(The American Society of Mechanical Engineers (ASME), 1976)Theoretical and experimental investigations were carried out to identify the dynamics of a machine tool structure during cutting to predict the borderline of stability against the self-excited ... -
Investigation on the Role of Workpiece Grain Size in Electrochemical Machining Process
(The American Society of Mechanical Engineers (ASME), 1976)The hypothesis of grain boundaries affecting anodic dissolution as well as the concept of their interaction with the electrolyte flow on the workpiece surface subjected to ECM is presented. ... -
V-Belt Life Prediction and Power Rating
(The American Society of Mechanical Engineers (ASME), 1976)A new service-life prediction and rating formula is presented for use in designing V-belt transmission drives. Capability of current V-belt fatigue formulas is extended to account for effect of ...