Journal of Applied Mechanics: Recent submissions
Now showing items 1121-1140 of 12181
-
Vibration of Thick Circular Disks and Shells of Revolution
(The American Society of Mechanical Engineers (ASME), 2018)A fully numerical and consistent method using the three-dimensional theory of elasticity is presented in this paper to study the free vibrations of an axially symmetric solid. The solid is defined in the cylindrical ... -
Analytical Prediction of Dynamic Properties of O-Ring With Hydrostatic Pressure Distribution
(The American Society of Mechanical Engineers (ASME), 2018)This study addresses the dynamic behaviors of a bearing supporting structure composed of rubber O-rings. To develop an analytical method to predict the dynamic properties of the O-rings without using any dimension-dependent ... -
Phase Transition of Temperature-Sensitive Hydrogel Under Mechanical Constraint
(The American Society of Mechanical Engineers (ASME), 2018)Temperature-sensitive hydrogel is blessed with outstanding properties which may be utilized for innovative appliance. However, this is not achievable if the phase transition property of it is not well understood. Under ... -
An Approach to Calculate the Elastic Interaction Energy of Inhomogeneous Precipitates: Application to γ′-Ni3Ti in A-286 Steel
(The American Society of Mechanical Engineers (ASME), 2018)The elastic interaction energy between several precipitates is of interest since it may induce ordering of precipitates in many metallurgical systems. Most of the works on this subject assumed homogeneous systems, namely, ... -
Toppling Dynamics of Regularly Spaced Dominoes in an Array
(The American Society of Mechanical Engineers (ASME), 2018)In-cylinder pressure-based combustion descriptors have been widely used for engine combustion control and spark advance scheduling. Although these combustion descriptors have been extensively studied for gasoline-fueled ... -
Toppling Dynamics of Regularly Spaced Dominoes in an Array
(The American Society of Mechanical Engineers (ASME), 2018)This paper studies a new comprehensive model for toppling dynamics of regularly spaced dominoes in an array. The model has unlocked the hypotheses introduced by Stronge and Shu (Stronge, W. J., and Shu, D., 1988, “The ... -
Combined Effect of Pressure and Shear Stress on Penny-Shaped Fluid-Driven Cracks
(The American Society of Mechanical Engineers (ASME), 2018)Penny-shaped fluid-driven cracks are often detected in many fluid–solid interaction problems. We study the combined effect of pressure and shear stress on the crack propagation in an impermeable elastic full space. Boundary ... -
On the Eshelby’s Inclusion Problem for Ellipsoids With Nonuniform Dilatational Gaussian and Exponential Eigenstrains
(The American Society of Mechanical Engineers (ASME), 2018)This work investigates the three-dimensional elastic state of inclusions in which the prescribed stress-free transformation strains or eigenstrains are spatially nonuniform and distributed either in a Gaussian, or an ... -
Analytical Solutions and Stress Concentration Factors for Annuli With Inhomogeneous Boundary Conditions
(The American Society of Mechanical Engineers (ASME), 2018)Analytical displacement and stress fields with stress concentration factors (SCFs) are derived for linearly elastic annular regions subject to inhomogeneous boundary conditions: an infinite class of the mth order polynomial ... -
Configurational Forces on Elastic Line Singularities
(The American Society of Mechanical Engineers (ASME), 2018)Configurational forces acting on two-dimensional (2D) elastic line singularities are evaluated by path-independent J-, M-, and L-integrals in the framework of plane strain linear elasticity. The elastic line singularities ... -
Transient Growth Before Coupled-Mode Flutter
(The American Society of Mechanical Engineers (ASME), 2018)Transient growth of energy is known to occur even in stable dynamical systems due to the non-normality of the underlying linear operator. This has been the object of growing attention in the field of hydrodynamic stability, ... -
Characterizing the Stimulated Reservoir Volume During Hydraulic Fracturing-Connecting the Pressure Fall-Off Phase to the Geomechanics of Fracturing
(The American Society of Mechanical Engineers (ASME), 2018)Microseismic imaging of the hydraulic fracturing operation in the naturally fractured rocks confirms the existence of a stimulated volume (SV) of enhanced permeability. The simulation and characterization of the SV evolution ... -
Hierarchical Divergence-Free Bases and Their Application to Particulate Flows
(The American Society of Mechanical Engineers (ASME), 2018)The paper presents an algebraic scheme to construct hierarchical divergence-free basis for velocity in incompressible fluids. A reduced system of equations is solved in the corresponding subspace by an appropriate iterative ... -
Zeroth-Order Shear Deformation Theory for Laminated Composite Plates
(The American Society of Mechanical Engineers (ASME), 2018)In this paper a zeroth-order shear deformation theory has been derived for static and dynamic analysis of laminated composite plates. The responses obtained by the theory for symmetric and antisymmetric laminates are ... -
Deformation of Microchannels Embedded in an Elastic Medium
(The American Society of Mechanical Engineers (ASME), 2018)The deformation of microfluidic channels in a soft elastic medium has a central role in the operation of lab-on-a-chip devices, fluidic soft robots, liquid metal (LM) electronics, and other emerging soft-matter technologies. ... -
In Situ Visualization Measurement of Flat Plate Ablation in High-Temperature Gas Flow
(The American Society of Mechanical Engineers (ASME), 2018)In this work, we develop an optoelectronic system for in situ observation and measurement in hypervelocity flows. The system has the advantages of strong radiation resistance and self-adaptive exposure time of the cameras. ... -
Soft Freestanding Planar Artificial Muscle Based on Dielectric Elastomer Actuator
(The American Society of Mechanical Engineers (ASME), 2018)Dielectric elastomer actuators (DEAs) exhibit interesting muscle-like attributes including large voltage-induced deformation and high energy density, thus can function as artificial muscles for soft robots/devices. This ... -
Tubular Adhesive Joints Under Axial Load
(The American Society of Mechanical Engineers (ASME), 2018)In this paper a general study on tubular adhesive joint under axial load is presented. We focus our attention on both static and dynamic behavior of the joint, including shear and normal stresses and strains in the adhesive ... -
Two Possible Defect Growth Modes in Soft Solids
(The American Society of Mechanical Engineers (ASME), 2018)Guided by the experimental observations in the literature, this paper discusses two possible modes of defect growth in soft solids for which the size-dependent fracture mechanics is not always applicable. One is omni-directional ... -
Multiparameter Spectral Analysis for Aeroelastic Instability Problems
(The American Society of Mechanical Engineers (ASME), 2018)This paper presents a novel application of multiparameter spectral theory to the study of structural stability, with particular emphasis on aeroelastic flutter. Methods of multiparameter analysis allow the development of ...