Journal of Applied Mechanics: Recent submissions
Now showing items 1101-1120 of 12181
-
Squeeze Film Force Using an Elliptical Velocity Profile
(The American Society of Mechanical Engineers (ASME), 2018)The squeeze film force in a circular Newtonian squeeze film has been theoretically predicted by using the elliptical velocity profile assumption in the squeeze film by three different approximation methods. As examples, ... -
Weakly Nonlinear Stability Analysis of Condensate/Evaporating Power-Law Liquid Film Down an Inclined Plane
(The American Society of Mechanical Engineers (ASME), 2018)Weakly nonlinear stability analysis of thin power-law liquid film flowing down an inclined plane including the phase change effects at the interface has been investigated. A normal mode approach and the method of multiple ... -
Effect of Properties and Turgor Pressure on the Indentation Response of Plant Cells
(The American Society of Mechanical Engineers (ASME), 2018)The indentation of plant cells by a conical indenter is modeled. The cell wall is represented as a spherical shell consisting of a relatively stiff thin outer layer and a softer thicker inner layer. The state of the interior ... -
Linear Multi-Degree-of-Freedom System Stochastic Response by Using the Harmonic Wavelet Transform
(The American Society of Mechanical Engineers (ASME), 2018)The wavelet transform is used to capture localized features in either the time domain or the frequency domain of the response of a multi-degree-of-freedom linear system subject to a nonstationary stochastic excitation. The ... -
Algebraic Convexity Conditions for Gotoh's Nonquadratic Yield Function
(The American Society of Mechanical Engineers (ASME), 2018)A necessary and sufficient condition in terms of explicit algebraic inequalities on its five on-axis material constants and a similarly formulated sufficient condition on its entire set of nine material constants are given ... -
An Experimental Study on Strain Hardening of Amorphous Thermosets: Effect of Temperature, Strain Rate, and Network Density
(The American Society of Mechanical Engineers (ASME), 2018)In this paper, we present an experimental study on strain hardening of amorphous thermosets. A series of amorphous polymers is synthesized with similar glass transition regions and different network densities. Uniaxial ... -
Preface
(The American Society of Mechanical Engineers (ASME), 2018) -
Forced Vibration of Cylindrical Helical Rods Subjected to Impulsive Loads
(The American Society of Mechanical Engineers (ASME), 2018)In this study, the forced vibration of cylindrical helical rods subjected to impulsive loads is theoretically investigated in the Laplace domain. The free vibration is then taken into account as a special case of forced ... -
Dr. Daniel C. Drucker, 1918–2001, Graduate Research Professor Emeritus, University of Florida
(The American Society of Mechanical Engineers (ASME), 2018) -
A Prediction Model of Casing Wear in Extended-Reach Drilling With Buckled Drillstring
(The American Society of Mechanical Engineers (ASME), 2018)Buckled drillstring easily existed in extended-reach drilling (ERD) engineering, causing casing wear more severe. However, the effect of the buckled drillstring on casing wear prediction is going unheeded in long-term ... -
Casing Wear Prediction Model Based on Casing Ellipticity in Oil & Gas Well-Drilling With Complex Structures
(The American Society of Mechanical Engineers (ASME), 2018)Any casing with perfect integrity within a complex oil and gas development scenario is subject to formation extrusion resulting in ellipticity. This paper proposes a novel casing wear prediction model, which encompasses ... -
Sagittal Plane Waves in Infinitely Periodic Multilayered Composites Composed of Alternating Viscoelastic and Elastic Solids
(The American Society of Mechanical Engineers (ASME), 2018)In order to design phononic crystals whose band-gaps are located in low-frequency ranges, researchers commonly adopt low stiffness polymeric materials as key constituents and exploit the high impedance mismatch between ... -
Dynamic Response of Kirchhoff Plate on a Viscoelastic Foundation to Harmonic Circular Loads
(The American Society of Mechanical Engineers (ASME), 2018)In this paper Fourier transform is used to derive the analytical solution of a Kirchhoff plate on a viscoelastic foundation subjected to harmonic circular loads. The solution is first given as a convolution of the Green’s ... -
Intersurface Adhesion in the Presence of Capillary Condensation
(The American Society of Mechanical Engineers (ASME), 2018)An elastic sphere adheres to a rigid substrate in the presence of moisture. The adhesion–detachment trajectory is derived based on the Hertz contact theory that governs the contact mechanics and Laplace–Kelvin equation ... -
Aerodynamic Interactions Between Parachute Canopies
(The American Society of Mechanical Engineers (ASME), 2018)Aerodynamic interactions between parachute canopies can occur when two separate parachutes come close to each other or in a cluster of parachutes. For the case of two separate parachutes, our computational study focuses ... -
Mesh Moving Techniques for Fluid-Structure Interactions With Large Displacements
(The American Society of Mechanical Engineers (ASME), 2018)In computation of fluid-structure interactions, we use mesh update methods consisting of mesh-moving and remeshing-as-needed. When the geometries are complex and the structural displacements are large, it becomes even more ... -
A Displacement Equivalence-Based Damage Model for Brittle Materials—Part I: Theory
(The American Society of Mechanical Engineers (ASME), 2018)In this paper, a displacement equivalence-based damage model for brittle materials is proposed. A new damage deactivation criterion, which depends on both the stress and strain states of the materials, is adopted. Based ... -
Steady-State Kink Band Propagation in Layered Materials
(The American Society of Mechanical Engineers (ASME), 2018)Failure by steady-state kink band propagation in layered materials is analyzed using three substantially different models. A finite element model and an analytical model are developed and used together with a previously ... -
Mathematical Treatise to Model Dihedral Energy in the Multiscale Modeling of Two-Dimensional Nanomaterials
(The American Society of Mechanical Engineers (ASME), 2018)An approximate mathematical treatise is proposed to improve the accuracy of multiscale models for nonlinear mechanics of two-dimensional (2D) nanomaterials by taking into account the contribution of dihedral energy term ... -
Analysis of Cone Wave Reflection in Finite-Size Elastic Membranes and Extension of the Ballistic Impact Problem From Elastic to Viscoelastic Membranes
(The American Society of Mechanical Engineers (ASME), 2018)The transverse ballistic impact on a two-dimensional (2D) membrane causes a truncated deformation cone to develop in the wake of tensile implosion waves. Here, the cone wave reflected from the finite boundaries of the ...