Journal of Applied Mechanics: Recent submissions
Now showing items 1021-1040 of 12181
-
Stabilization of Frictional Sliding by Normal Load Modulation
(The American Society of Mechanical Engineers (ASME), 2018)This paper presents the stability analysis of a system sliding at low velocities (<100 μm⋅s−1 ) under a periodically modulated normal load, preserving interfacial contact. Experiments clearly evidence that normal ... -
Dynamic Analysis of a Mode I Propagating Crack Subjected to a Concentrated Load
(The American Society of Mechanical Engineers (ASME), 2018)This work investigates the phenomenon of mode I central crack propagating with a constant speed subjected to a concentrated load on the crack surfaces. This problem is not a self-similar problem. However, the method of ... -
Elastic Singularity Interacting With Various Types of Interfaces
(The American Society of Mechanical Engineers (ASME), 2018)The elastic solution for a singularity in an anisotropic trimaterial with perfectly bonded interfaces was obtained in the previous work by Choi and Earmme. The term “trimaterial” denotes an infinite body composed of three ... -
An Extended Finite Element Method for Two-Phase Fluids
(The American Society of Mechanical Engineers (ASME), 2018)An extended finite element method with arbitrary interior discontinuous gradients is applied to two-phase immiscible flow problems. The discontinuity in the derivative of the velocity field is introduced by an enrichment ... -
The Bending of Curved Pipes With Variable Wall Thickness
(The American Society of Mechanical Engineers (ASME), 2018)A general solution is presented for the in-plane bending of short-radius curved pipes (pipe bends) which have variable wall thickness. Using the elastic thin-shell theory, the actual radius of curvature of the pipe’s ... -
Green’s Functions for Infinite and Semi-infinite Anisotropic Thin Plates
(The American Society of Mechanical Engineers (ASME), 2018)This paper presents fundamental solutions of an anisotropic elastic thin plate within the context of the Kirchhoff theory. The plate material is inhomogeneous in the thickness direction. Two systems of problems with ... -
The Temperature-Dependent Ideal Shear Strength of Solid Single Crystals
(The American Society of Mechanical Engineers (ASME), 2018)Knowledge of the ideal shear strength of solid single crystals is of fundamental importance. However, it is very hard to determine this quantity at finite temperatures. In this work, a theoretical model for the ... -
Nonstick and Stick-Slip Motion of a Coulomb-Damped Belt Drive System Subjected to Multifrequency Excitations
(The American Society of Mechanical Engineers (ASME), 2018)In this paper, the rotational vibration of a belt drive system with a dry friction tensioner subjected to multiple harmonic excitations is studied. The work is focused on the impact of the dry friction torque combined with ... -
Uniaxial Ratchetting of Filled Rubber: Experiments and Damage-Coupled Hyper-Viscoelastic-Plastic Constitutive Model
(The American Society of Mechanical Engineers (ASME), 2018)A series of stress-controlled uniaxial cyclic tension-unloading tests are discussed to investigate the ratchetting of a filled rubber at room temperature. It is shown that obvious ratchetting occurs and depends apparently ... -
Effect of Material Frame Rotation on the Hardening of an Anisotropic Material in Simple Shear Tests
(The American Society of Mechanical Engineers (ASME), 2018)The shear stress–strain response of an aluminum alloy is measured to a shear strain of the order of one using a pure torsion experiment on a thin-walled tube. The material exhibits plastic anisotropy that is established ... -
Propagation of a Plane Strain Hydraulic Fracture With a Fluid Lag in Permeable Rock
(The American Society of Mechanical Engineers (ASME), 2018)Based on the KGD scheme, this paper investigates, with both analytical and numerical approaches, the propagation of a hydraulic fracture with a fluid lag in permeable rock. On the analytical aspect, the general form of ... -
Indentation Problems of Two-Dimensional Anisotropic Thermoelasticity With Perturbed Boundaries
(The American Society of Mechanical Engineers (ASME), 2018)Complex variable representations in the Stroh formalism are used to analyze the problem of rigid stamp indentation on an irregularly shaped surface of an anisotropic thermoelastic body. The shape of boundary surface ... -
The Interaction of Two Spherical Gas Bubbles in an Infinite Elastic Solid
(The American Society of Mechanical Engineers (ASME), 2018)The elastic strain and stress fields between two bubbles of different sizes and different pressures were estimated by using the fundamental result of Eshelby. The equivalent inclusion method was extended to the case of two ... -
Proper Orthogonal Decomposition Framework for the Explicit Solution of Discrete Systems With Softening Response
(The American Society of Mechanical Engineers (ASME), 2018)The application of explicit dynamics to simulate quasi-static events often becomes impractical in terms of computational cost. Different solutions have been investigated in the literature to decrease the simulation time ... -
Transient Study of Mode III Fracture in an Elastic Solid With a Single Plane of Material Symmetry
(The American Society of Mechanical Engineers (ASME), 2018)Diffraction of a plane SH-wave causes semi-infinite mode III crack extension in an unbounded linear elastic solid. The solid is nonorthotropic, with a single plane of material symmetry that is perpendicular to the crack ... -
Discussion: “Normal Indentation of Elastic Half-Space With a Rigid Frictionless Axisymmetric Punch” (Fu, G., and Chandra, A., 2002, ASME J. Appl. Mech., 69, pp. 142–147)
(The American Society of Mechanical Engineers (ASME), 2018) -
The Motion of a Rolling Polygon
(The American Society of Mechanical Engineers (ASME), 2018)Galileo was the first to analyze the motion of spheres rolling down an inclined surface. Since then, Coulomb’s law of dry friction has covered the case of sliding particles. However, a particle that is not round can still ... -
Shear Buckling of Sandwich, Fiber Composite and Lattice Columns, Bearings, and Helical Springs: Paradox Resolved
(The American Society of Mechanical Engineers (ASME), 2018)As shown three decades ago, in situations where the initial stresses before buckling are not negligible compared to the elastic moduli, the geometrical dependence of the tangential moduli on the initial stresses must be ... -
Wave Directionality in Three-Dimensional Periodic Lattices
(The American Society of Mechanical Engineers (ASME), 2018)This work focuses on elastic wave propagation in three-dimensional (3D) low-density lattices and explores their wave directionality and energy flow characteristics. In particular, we examine the dynamic response of Kelvin ... -
Experimental Measurements of Velocity, Potential, and Temperature Distributions in Liquid Aluminum During Electromagnetic Stirring
(The American Society of Mechanical Engineers (ASME), 2018)An experimental technique has been developed to measure both axial and transverse velocities and temperature distribution in molten aluminum. Couette flow of liquid aluminum, lead, tin, and low melting alloy in cylindrical ...